6
Press 3/4 to select the settings, and then press [MENU/SET].
Item
[SHOOTING DATE]
[NAME]
[LOCATION]
[TRAVEL DATE]
[TITLE]
7
Press [
].
8
Press 3/4 to select [OK] and then press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
Note
•
When you print pictures stamped with text, the date will be printed over the stamped text if you
specify printing of the date at the photo shop or on the printer.
•
You can set up to 100 pictures at one time in [MULTI].
•
The picture quality may deteriorate when text stamping is carried out.
•
Depending on the printer being used, some characters may be cut at printing. Check before
printing.
•
The [TEXT STAMP] feature is disabled during the following conditions:
–
Motion pictures
–
Pictures recorded without setting the clock and title
–
Pictures that were previously stamped with [TEXT STAMP]
–
Pictures taken with [
–
Pictures recorded with other equipment
Playback/Editing
[OFF]
[W/OTIME]:
Stamp the year, month and date.
[WITHTIME]:
Stamp the year, month, day, hour and minutes.
[OFF]
Name registered in Face Recognition will be
[
]:
stamped.
Stamps names on pictures that already have
[
]:
been registered name settings of [BABY1]/
[BABY2] or [PET] in Scene Mode.
[OFF]
[ON]:
Stamps the travel destination name set under
[LOCATION].
[OFF]
[ON]:
Stamps the travel date set under
[TRAVEL DATE].
[OFF]
[ON]:
Title input in the [TITLE EDIT] will be stamped.
], [
] or [
]
- 149 -
Setting item