[Protect] - Panasonic Lumix DMC-GF3 Basic Owner's Manual

You can set protection for pictures you do not want to be deleted by mistake.
1
Select [PROTECT] on the [PLAYBACK] Mode menu.
2 Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
3
Select the picture, and then press
[MENU/SET].
When [MULTI] has been selected
•
Repeat these steps for each picture.
•
The settings are canceled when
[MENU/SET] is pressed again.
•
Exit the menu after it is set.
∫ Canceling all the [PROTECT] settings
1 Select [PROTECT] on the [PLAYBACK] Mode menu.
2 Press 3/4 to select [CANCEL] and then press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
Note
•
The [PROTECT] feature is only designed to work with this camera.
•
Even if you protect pictures on a card, they will be deleted if the card is formatted.
•
Even if you do not protect pictures on a card, they cannot be deleted when the card's
Write-Protect switch is set to [LOCK].
Playback/Editing

[PROTECT]

[SINGLE]
Press 2/1 to select
the picture.
- 158 -
(P57)
[MULTI]
Press 3/4/2/1 to
select the pictures.