Panasonic Lumix DMC-GF3 Basic Owner's Manual page 150

∫ Setting the White Balance manually
Set the White Balance value. Use to match the condition when taking photographs.
1 Select [ ], [
1 2
2 Aim the camera at a sheet of white paper etc. so
that the frame in the center is filled by the white
object only and then touch [SET].
Note
•
White Balance may not be set when the subject is too bright or too dark. Set the White Balance
again after adjusting to appropriate brightness.
∫ Setting the color temperature
You can set the color temperature manually for taking natural pictures in different lighting
conditions. The color of light is measured as a number in degrees Kelvin. As the color
temperature increases, the picture becomes more bluish. As the color temperature
decreases, the picture becomes more reddish.
1
Select [ ] and then touch [WB K SET].
2
Touch the color temperature setting bar.
•
It is also possible to set the values by touching [ 3 ]/[ 4 ] or
pressing 3 / 4 of the cursor button.
•
You can set a color temperature from [2500K] to
[10000K].
3 Touch [SET].
Recording
] and then touch [WHITE SET].
- 94 -