Panasonic Lumix DMC-GF3 Basic Owner's Manual page 143

Setting up
•
Perform the operation after canceling the touch shutter function.
When selecting [š], [Ø]
Position and size of the AF area can be changed.
1 Touch the subject.
•
AF area setting screen is displayed.
•
AF area setting screen can be displayed also by pressing
2 and then 4.
•
AF area can be moved also by the cursor button in the AF
area setting screen.
•
The AF area returns to the center when [
pressed.
2
Touch the slide bar to change the size
of AF area frame.
•
It can be changed to 4 different sizes.
•
Enlarge/reduce can also be performed by rotating the
control dial.
3
Touch [SET].
•
It is also possible to set by pressing [MENU/SET].
•
AF area with the same function as [Ø] is displayed in the touched position, when the [š]
is selected. Setting of the AF area is cleared when [
When selecting [ ]
The 23 AF areas can be divided into 9 areas and the area to be focused can be set.
Touch the screen to display the AF area setting screen,
and select the AF area frame as shown in the figure on
the right.
•
After releasing your finger from the touch panel for a while, AF
area frame will disappear, and only [i] display (center point of
selected AF area frame) will remain on the screen.
•
AF area frame can be selected by the cursor button when the
AF area setting screen is displayed by pressing 2 and then 4.
AF area frame is set by pressing [MENU/SET].
•
Setting of the AF area frame is canceled when [
Recording
position of the AF area/changing size of the AF area
- 87 -
] is
] is touched.
] is touched.