Control Dial - Panasonic Lumix DMC-GF3 Basic Owner's Manual

u [VOLUME]
•
When you connect the camera to a TV, the volume of the TV speakers does not change.
[MONITOR]
•
Some subjects may appear differently from actuality on the LCD monitor. However, this does
not affect the recorded pictures.
[LCD MODE]
LCD
•
The brightness of the pictures displayed on the LCD monitor is increased so some subjects
may appear differently from actuality on the LCD monitor. However, this does not affect the
recorded pictures.
•
The LCD monitor automatically returns to standard brightness after 30 seconds when recording
in [MODE1]. It will light up brightly again by button or touch operation.
•
If the screen is difficult to see because of light from the sun etc. shining on it, use your hand or
another object to block the light.
•
The number of recordable pictures decreases in [AUTO] and [MODE1].
•
[AUTO] is only available in the Recording Mode.
•
[AUTO] is disabled during motion picture recording.
•
When the menu screen is displayed in a dark environment etc., the LCD monitor becomes
darker even if [LCD MODE] is set to [MODE2].
•
The initial setting when using the AC adaptor (optional) is [MODE2].
Basic
Adjust the volume of the speaker to any of 7 levels.
Brightness, color, or red or blue tint of the LCD monitor is
adjusted.
1
Select the settings by pressing 3/
4, and adjust with 2/1 or the

control dial.

2 Press [MENU/SET] to set.
The brightness of the LCD monitor can be adjusted depending on
how bright it is around the camera.
„ [AUTO]:
The brightness is adjusted automatically depending on how bright
it is around the camera.
... [MODE1]:
1
Make the LCD monitor brighter.
...
[MODE2]:
2
Set the LCD monitor to the standard brightness.
...
[MODE3]:
3
Make the LCD monitor darker.
- 64 -