Download Print this page

Allied Telesis 86222-27 Release Note page 5

Patch for rapier switches

Advertisement

Patch 86222-27 For Rapier Switches
Patch 86222-27 for Software Release 2.2.2
C613-10319-00 REV Z
PCR: 03526
Module: SWI
The Switch MIB did not show the correct dot1StpPriority value. This issue
has been resolved.
PCR: 03531
Module: SWI
After creating a trunk group, the activity LEDs did not flash unless the
configuration was used at reboot. This issue has been resolved so that the
LEDs flash correctly whenever a trunk group is created.
PCR: 03572
Module: STP
The dot1dStpPortForwardTransitions value in the dot1dBridge MIB was not
incremented correctly when STP transitioned a port to the Forwarding state.
This issue has been resolved.
PCR: 03574
Module: STP
The dot1dStpInfoTopChanges value in the dot1dBridge MIB was not
incremented correctly when a topology change was detected by the bridge.
This issue has been resolved.
PCR: 03576
Module: IPG
When the device received a route from two separate sources to the same
destination network, RIP only used the metric value when selecting the best
route. RIP now selects the route by lowest preference value, or if they are the
same, by the metric.
Features in 86222-25
Patch file details are listed in Table 3:
Table 3: Patch file details for Patch 86222-25.
Base Software Release File
Patch Release Date
Compressed Patch File Name
Compressed Patch File Size
Patch 86222-25 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
PCR: 02300
Module: Firewall
If the command ADD FIREWALL POLICY RULE SOURCEPORT=ALL was
executed, a value of "65535" was incorrectly displayed for the
SOURCEPORT parameter for that rule in the SHOW FIREWALL POLICY
command. This issue has been resolved.
PCR: 02400
Module:
CORE,FFS,FILE,INSTALL,SCR
If a problem occurred with NVS, some critical files were lost. As a result, the
equipment was forced to load only boot ROM software at boot time. This
patch combined with the new version of the boot ROM software (pr1-1.2.0
for the AR700 series) resolves this issue.
86s-222.rez
15-April-2003
86222-25.paz
443760 bytes
Network affecting: No
Network affecting: No
5
Level: 3
Level: 3
Level: 3
Level: 3
Level: 2

Advertisement

loading