Advertisement
Patch 86222-27 For Rapier Switches
Patch 86222-27 for Software Release 2.2.2
C613-10319-00 REV Z
Features in 86222-26
Patch file details are listed in Table 2:
Table 2: Patch file details for Patch 86222-26.
Base Software Release File
Patch Release Date
Compressed Patch File Name
Compressed Patch File Size
Patch 86222-26 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
PCR: 02498
Module: VLAN
The correct protocol number is now returned by VLAN Relay.
PCR: 03172
Module: FIREWALL
Telnet access from a public interface to another public interface was not
denied. This issue has been resolved.
PCR: 03241
Module: FIREWALL
When deleting a list associated with a policy, all rules were being deleted.
Now only the rules associated with the policy and list are deleted.
PCR: 03412
Module: FIREWALL
FTP data transfers did not succeed for some types of NAT. Also, the
presence of flow control TCP flags meant that some TCP control packets
were not recognised. These issues have been resolved.
PCR: 03415
Module: FIREWALL
When using a policy routing rule, the firewall did not translate the source
IP address of a broadcast packet correctly. This issue has been resolved.
PCR: 03416
Module: SWI
Previously, the ADD SWITCH L3FILTER MATCH command was accepted
if the TYPE parameter was not specified. This command now requires the
TYPE parameter, and an error message will be returned if the TYPE
parameter is not specified.
PCR: 03420
Module: IPG, SWI
It is now possible to prevent specified ports from acting as IGMP all-group
ports, and specify which ports are allowed to behave as all-group entry
ports. This is enabled with the ENABLE IP IGMP ALLGROUP command,
and disabled with the DISABLE IP IGMP ALLGROUP command.
For details, see "IGMP Snooping All-Group Entry" on page 42.
86s-222.rez
30-May-2003
86222-26.paz
1028794 bytes
Network affecting: No
3
Level: 3
Level: 2
Level: 3
Level: 2
Level: 3
Level: 3
Advertisement
