Allied Telesis 86241-01 Release Note
Allied Telesis 86241-01 Release Note

Allied Telesis 86241-01 Release Note

Patch for rapier switches and ar800 series modular switching routers

Advertisement

Quick Links

Patch Release Note
Patch 86241-01
For Rapier Switches and AR800 Series
Modular Switching Routers
S im ply co nn ecti n g the worl d

Introduction

This patch release note lists the issues addressed and enhancements made in
patch 86241-01 for Software Release 2.4.1 on existing models of Rapier L3
managed switches and AR800 Series L3 modular switching routers. Patch file
details are listed in Table 1.

Table 1: Patch file details for Patch 86241-01.

Base Software Release File
Patch Release Date
Compressed Patch File Name
Compressed Patch File Size
This release note should be read in conjunction with the following documents:
Release Note: Software Release 2.4.1 for Rapier Switches, AR300 and
AR700 Series Routers, and AR800 Series Modular Switching Routers
(Document Number C613-10338-00 Rev A) available from
www.alliedtelesyn.co.nz/documentation/documentation.html.
Rapier Switch Documentation Set for Software Release 2.4.1 available on
the Documentation and Tools CD-ROM packaged with your switch, or
from www.alliedtelesyn.co.nz/documentation/documentation.html.
WARNING: Using a patch for a different model or software release may cause
unpredictable results, including disruption to the network. Information in this
release note is subject to change without notice and does not represent a
commitment on the part of Allied Telesyn International. While every effort has
been made to ensure that the information contained within this document and
the features and changes described are accurate, Allied Telesyn International
can not accept any type of liability for errors in, or omissions arising from the
use of this information.
86s-241.rez
26-July-2002
86241-01.paz
27732 bytes

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 86241-01 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Allied Telesis 86241-01

  • Page 1 Introduction This patch release note lists the issues addressed and enhancements made in patch 86241-01 for Software Release 2.4.1 on existing models of Rapier L3 managed switches and AR800 Series L3 modular switching routers. Patch file details are listed in Table 1.
  • Page 2 Features in 86241-01 Patch 86241-01 includes the following enhancements: PCR: 02036 A new command allows the Layer 3 aging timer to be changed: where seconds can be 30 - 43200. After each cycle of the ageing timer, all existing Layer 3 entries with the hit bit set will have the hit bit reset to zero, and all existing Layer 3 entries with the hit bit set to zero will be deleted.
  • Page 3 Patch 86241-01 For Rapier Switches and AR800 Series Modular Switching Routers PCR: 02250 Sometimes the Firewall erroneously used NAT. This issue has been resolved. PCR: 02259 A dual Ethernet router was incorrectly accepting an IP address from a DHCP server when the offered address was on the same network as the other Ethernet interface.
  • Page 4 Patch Release Note Patch 86231-06 for Software Release 2.3.1 C613-10328-00 REV F...

Table of Contents