Advertisement
2
Some of the issues addressed in this Release Note include a level number. This
number reflects the importance of the issue that has been resolved. The levels
are:
This issue will cause significant interruption to network services, and
Level 1
there is no work-around.
Level 2
This issue will cause interruption to network service, however there
is a work-around.
Level 3
This issue will seldom appear, and will cause minor inconvenience.
This issue represents a cosmetic change and does not affect network
Level 4
operation.
Features in 86222-27
Patch 86222-27 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
PCR: 03501
Module: IPG
A fatal error occurred when DNS relay received a query if the transaction
ID was zero. This issue has been resolved.
PCR: 03616
Module: IPG
Three new commands have been added to enable and disable transmission
of the following ICMP messages: Network Unreachable, Host Unreachable, and
all Redirect messages.
The commands are:
DISABLE IP
ICMPREPLY[={ALL|NETUNREACH|HOSTUNREACH|REDIRECT}]
ENABLE IP
ICMPREPLY[={ALL|NETUNREACH|HOSTUNREACH|REDIRECT}]
SHOW IP ICMPREPLY
For details, see "Enable and Disable ICMP Messages" on page 40.
PCR: 03579
Module: IPG
When IGMP memberships were created at layer 3 from multicast data,
sending an IGMP Membership Leave message incorrectly removed all ports
from the specified group. This issue has been resolved.
PCR: 03615
Module: LOAD
Zmodem uploads to some terminal emulators did not succeed because the
16-bit checksum was incorrect. This issue has been resolved.
PCR: 03625
Module: STP, SWI
The MIB object dot1dStpTimeSinceTopologyChange has been implemented to
record when a topology change is detected by the bridge.
Patch Release Note
Level: 1
Level: 4
Level: 1
Level: 3
Level: 4
Patch 86222-27 for Software Release 2.2.2
C613-10319-00 REV Z
Advertisement
