Advertisement
Patch 86222-27 For Rapier Switches
Patch 86222-27 for Software Release 2.2.2
C613-10319-00 REV Z
PCR: 02070
Module: CORE
The TickTimer ran one percent slower than it should have. This issue has
been resolved.
PCR: 02079
Module: IPG
Static ARPs can now be added to tagged vlans.
PCR: 02094
Module: IPG
When an IP flow table contained the IP flow structure for a spoofed packet,
the SHOW IP FLOW command would crash when executed. This issue has
been resolved.
Features in 86222-14
Patch file details are listed in Table 13.
Table 13: Patch file details for Patch 86222-14.
Base Software Release File
Patch Release Date
Compressed Patch File Name
Compressed Patch File Size
Patch 86222-14 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
PCR: 02005
Module: IPG
When telnetting to the switch, the TCP connection was reset, and when the
packet was passed to IPG_Forward a fatal error occurred. This patch
implements a workaround.
PCR: 02035
Module: VLAN
The CREATE CONFIG command now correctly configures tagged ports
belonging to VLANs not in the default STP.
PCR: 02036
Module: SWITCH
A new command allows the Layer 3 aging timer to be changed:
SET SWITCH L3AGEINGTIMER=<seconds>
where seconds can be 30 - 43200. After each cycle of the ageing timer, all
existing Layer 3 entries with the hit bit set will have the hit bit reset to zero,
and all existing Layer 3 entries with the hit bit set to zero will be deleted.
The SHOW SWITCH command output now displays the Layer 3 ageing
timer value.
PCR: 02038
Module: PING
Resolution of PCR 02011 in Patch 12 sometimes caused a fatal error. This
issue has been resolved.
Network affecting: No
Network affecting: No
Network affecting: No
86s-222.rez
28-Feb-2002
86222-14.paz
335336 bytes
Network affecting: No
Network affecting: No
Network affecting: No
Network affecting: No
25
Advertisement
