Fuser Paper Exit Guide Assembly Removal - Lexmark T430 Service Manual

Fuser paper exit guide assembly removal

1. Unplug the printer.
2. Remove the left side cover. See
removal" on page
3. Remove the right side. See
page 4-12.
4. Remove the rear cover. See
page 4-15.
5. Using a long shank Phillips screwdriver, remove the four
screws (A) which fasten the fuser metal frame to the printer
frame.
4-14.
"Right side cover removal" on
"Rear cover removal" on
4048-1xx
"Left side cover
Repair information
4-29