Lexmark T430 Quick Reference

Quick Reference 3 Squeeze the width guide tab and the width guide together, and
then slide the guide all the way to the right.
4
Squeeze the length guide tab and the length guide together, and
then slide the guide to its fully extended position.
Loading a tray
1 Remove the tray completely.
5 Flex the sheets back and forth to loosen them, and then fan
them. Do not fold or crease the print media. Straighten the edges
of the stack on a level surface.
For the optional 500-sheet tray, open the cover.
6
Place the print media against the left side of the tray and insert it
under the metal stop, print side down. Do not bend or wrinkle the
sheets.
2 Press the metal plate down.
Metal stop
Note:
7 Slide the width and length guides until they lightly touch the
edges of the print media.
8
For the optional 500-sheet tray, close the cover.
9
Reinstall the tray.
Loading the multipurpose feeder
The multipurpose feeder accepts plain paper, envelopes,
transparencies, card stock, and labels.
Maximum stack height indicator
1
Open the multipurpose feeder door, and then pull out the
extension.
Do not exceed the maximum stack height. Overfilling
the tray may cause a jam.
2 Unfold the extension. 6 In your word processor, spreadsheet, browser, or other
application, select File
7
Click Properties (or Options, Printer, or Setup depending on
the application) to view the printer driver settings.
8
Select MP Feeder from the Form Source list box.
9
Select your print media type (envelopes, transparencies, and so
on) from the Media Type list box.
10
Click OK, and then send your print job as usual.
Canceling a print job
3
Slide the width guide all the way to the right.
If the job you want to cancel is printing, and Busy appears on the
display:
1
Press Menu until you see Job Menu, and then press Select.
2
Press Menu until you see Cancel Job, and then press Select.
Printing a menu settings page
1 Make sure the printer is on and the Ready message appears.
2 Press and release Menu until you see Utilities Menu, and
4
Place paper print side up, or envelopes flap side down, in the
then press Select.
feeder. Push the print media forward without forcing it.
3 Press and release Menu until you see Print Menus, and then
Note: Orient the print media correctly for the size, type, and
press Select.
print method you are using. Refer to the publications
CD for detailed information about orienting print media.
Do not overfill the feeder.
5
Slide the width guide until it lightly touches the side of the stack.
Common operator panel messages
Print.
For a more detailed list of operator panel messages, refer to the
publications CD.
Message Actions
• Remove the currently loaded print media
Change Tray <x>
from the specified tray, and then load the
The printer is requesting
requested print media.
a different size or type of
Select
print media than what is • Press
loaded. print on the print media currently loaded in
the tray.
• Cancel the current job.
Load Manual • Load the multipurpose feeder with the print
media specified on the second line of the
The printer is ready for
display.
print media to be
inserted into the • Press Select
multipurpose feeder. feed request and print on print media
already installed in one of the trays.
• Cancel the current job.
Waiting • Press Go to print the contents of the buffer.
The printer has received • Cancel the current job.
data to print but is
waiting for a command or
additional data.
Press Go to ready the printer to receive jobs.
Not Ready
The printer is not ready
to process data.
• Wait for the message to clear.
Flushing Buffer
The printer is discarding • Sometimes this message means the driver
the current print job. data did not match what the printer was
expecting. If the situation recurs, try
printing from another printer driver.
© 2004 Lexmark International, Inc., All rights reserved.
P/N 26H0080 *26H0080*
E.C. 10H044
to clear the message and
or Go to ignore the manual
Printed in USA
03/04