Lexmark T430 Service Manual page 54

4048-1xx
User attendance messages (continued)
Message
2-20
Service Manual
Explanation
This message displays when the printer detects
an unformatted flash at power on. Press Go to
clear the message. The flash is marked as bad
and normal operation continues. Flash
operations are not allowed until the flash is
formatted.
This error displays when a network port is
detected, but the printer cannot establish
communications with it.
Press Go to clear the message. The printer
disables all communications to the network
interface.
An unsupported flash option is installed in the
x
solutions port. Turn off the printer and remove
the unsupported flash option in the specified
slot.
This error is displayed when data is sent to the
printer across the parallel port, but the parallel
port has been disabled. Once this message is
displayed, reporting of further errors is
suppressed until the menus are entered, or the
printer is reset. The following actions may be
taken:
• Press Go to clear the message. The printer
discards any data received on the parallel
port.
• Press Menu until
and select Reset Printer.
Displayed when status is requested over the
USB port, but the port has been disabled. Once
the error has been displayed for the first time,
reporting of further errors is suppressed until the
menus are entered or the printer is reset.
The following actions may be taken:
• Press Go to clear the message. The printer
discards any data received on the USB port.
• Press Menu until
and select Reset Printer.
This error code displays when too many input
trays are attached to the printer. Remove the
extra trays.
appears
appears