Lexmark T430 Service Manual page 138

4048-1xx
5. Open the exit tray (rear door).
6. Remove the five remaining screws (B). There are a total of six.
7. Lift the top cover slightly with one hand while pulling out on the
rear cover.
Installation notes:
•
Handle carefully. Do not touch the rollers.
•
When reinstalling the rear cover, position the fuser exit guide
fingers so they are not bound by the rear cover. A bind causes
jams.
•
Be sure the spring contacts on the left side of the rear cover
make good contact with the LVPS cage.
4-16
Service Manual