Paper Exit Guide Assembly Removal - Lexmark E250D - E B/W Laser Printer Service Manual

Paper exit guide assembly removal

1.
Remove the rear cover. See
2.
Remove the one screw above the reversing solenoid. See
3.
Remove the three screws (A).
4.
Lift the back of the top cover (right side in photo) to prevent the gears on the assembly from touching other
items while removing, especially the fuser mounting bracket.
5.
Remove the paper exit guide assembly.
"Rear cover removal" on page
A
4-6.
"Top cover removal" on page
Repair information
4512-220, -230
4-7.
4-37