Environment Commands And Variables - Lexmark Optra T Reference

Environment Commands and Variables

This section describes the printer environment variables and the PJL commands used
to modify or query the variables.
Note:
Table 3-2: Environment Variable Categories
Categories
Common Variables for Both Printer Languages
Printer Unique Variables for Both Printer Languages
Common Variables for PCL emulation
Printer Unique Variables for PCL emulation
Common Variables for PostScript emulation
Printer Unique Variables for PostScript emulation
Printer Unique LRESOURCE Variables
The following commands modify the environment variables, and are described in this
section:
•
•
•
•
The following commands query the environment variables, and are described in
"Status Readback Commands" on page 3-51.
•
•
•
The word common applies to those variables common to both your printer
and the Hewlett-Packard Company's LaserJet printers.
DEFAULT
SET
INITIALIZE
RESET
INQUIRE
DINQUIRE
INFO
3-7
Beginning
on Page ...
3-12
3-19
3-45
3-46
3-48
3-49
3-50
PJL