Unlocking A Protected File Or Device For The Current Job - Lexmark Optra T Reference

Unlocking a Protected File or Device for the Current Job

The file or device unlocked by the execution of this command is automatically
re-locked upon execution of the EOJ command or by a printer language change.
Syntax:
@PJL LDECLARE LRESOURCE : "device:filename.filetype"
LRWLOCKJ = "password"[<CR>]<LF>
@PJL LDECLARE LRESOURCE : "device:filename.filetype"
LWLOCKJ = "password"[<CR>]<LF>
LRESOURCE : "device:filename.filetype"
Values for "
device
filename
filetype
LRWLOCK = "password"
See "Printer Unique LRESOURCE Variables" on page 3-49 for information about
values for
device:filename.filetype
, ,
flash flash1
A unique identifier for a file, such as the macro ID for a PCL
macro, the symbol set ID for a PCL symbol set, the font ID for a
PCL font, or the actual file name for data, Type 1 fonts, and
demo files as shown on the Directory. The
sensitive.
An identifier that categorizes the file, such as
macros or
p5symset
beginning on page 3-80 for a complete list of the supported file
types. The
filetype
or
LWLOCK = "password"
LRWLOCK = "password"
3-90
" are:
, or (case insensitive)
disk disk1
for PCL symbol sets. See the table
is case sensitive.
Parameters
and
LWLOCK = "password"
PJL
is case
filename
for PCL
p5macro
parameters.