Lexmark Optra T Reference page 258

Table 4-19: PostScript Emulation Device Parameters (Continued)
Key Type
PortLocation string
PSSmartSwitch boolean
RobustXon boolean
SerialMode name
StopBits integer
Type name
Device Parameters for the Communication Device %LocalTalk%, %LocalTalkA%
(%LocalTalk_NV% and %LocalTalk_Pending% contain the same parameters)
DelayedOutputClose boolean
Enabled boolean
4-90
Definition
(Read-only) Designates the physical location of the port related to the
parameter set. Supported values are:
Standard Port
Option Slot 1
Option Slot 2
Option Slot 3
Supported values are:
True PS SmartSwitch is set to On.
False PS SmartSwitch is set to Off.
For more information, see "Using SmartSwitch" on page 4-1.
Supported values are:
True RobustXon is set to On.
False RobustXon is set to Off.
Designates the serial communication configuration: RS232C or RS422.
Returns the value of the Serial
values are:
RS232
RS422
Returns RS232 on a printer that is attached with a cable that does not
support RS-422.
(Read-only)
Supported values are:
1
2
(Read-only) Always returns the value of /Communications.
Selects how the printer manages the port at the end of each print job.
Supported values are:
True An end-of-file message is not sent until the current job and all
preceding jobs finish printing.
False An end-of-file message is sent as soon as a job finishes
executing in the interpreter, whether or not that job has
finished printing.
This value is set independently for each port.
(Read-only)
Supported values are:
True
False
PostScript
RS-232/RS-422 menu item. Supported