Lexmark Optra T Reference page 271

Table 4-19: PostScript Emulation Device Parameters (Continued)
Key Type
Device Parameters for the Parameters Device %Engine%
BSizeStandard name
Darkness real
PageCount integer
TimeToStandby integer
Type name
Device Parameters for the Parameters Device %Console%
Language name
Type name
Device Parameters for the IODevice Device %disk1%
BlockSize integer
Free integer
HasNames boolean
4-103
Definition
(Read-only) Value of JIS
Designates the print darkness.
Legal value: Any non-negative real number from 0.0 to 1.0, inclusive.
For queries, the Print Darkness setting is returned as a real value:
0.1 Lightest
0.3 Lighter
0.5 Normal
0.7 Darker
0.9 Darkest
When the Darkness value is modified, the following ranges are used to
determine the Print Darkness setting:
0.0 - 0.2 Lightest
>0.2 - 0.4 Lighter
>0.4 - 0.6 Normal
>0.6 - 0.8 Darker
>0.8 - 1.0 Darkest
(Read-only) Page Count
Power Saver. Supported values are:
0 to 120, in minutes
(Read-only) Always returns the value of /Parameters.
Display Language
(Read-only) Always returns the value of /Parameters.
(Read-only)
(Read-only) Indicates the amount of free space available (in pages) on the
disk. Valid only if the disk is mounted (mounted is set to True). A value of 0
(zero) indicates that either the disk is not mounted or is full.
(Read-only) Indicates if the disk supports named files. Valid only if the disk
is mounted (mounted is set to True). If the disk is not mounted, the
parameter has a value of False.
PostScript