Lexmark Optra T Reference page 158

Table 3-22: Variables for Flash and Disk File and Password Commands (Continued)
Parameter Syntax
filedevice
DEVICE =
flashdevice DEVICE =
filename FILENAME = "fname"
OLDFILENAME = "fname"
NEWFILENAME = "fname"
Description
filedevice
File storage media. Case insensitive.
flash
flash1
disk
disk1
rom
The
Note: The command is ignored if the device is not installed.
flashdevice
File storage media.
flash
flash1
Fname is comprised of a filename, a unique identifier for a
file, and a filetype, which specifies the type of file. The format
filename.filetype
is
The
macro ID
symbol set ID
font ID
actual filename
The
t1
sFnt5
bFnt5
MAC5
data
type1
demo
p5scalable
p5bitmap
p5macro
p5symset
ppdsbm
xlmacro
All fname specifications must be enclosed in quotation marks
and cannot exceed 127 characters.
If the file is password-protected, the password must be
provided in order to unlock the file.
For additional information about passwords, see "File and
Device Protection Commands" on page 3-86.
3-81
rom
value is used for the LRUNFILE command only.
.
filename
must be one of the following:
PCL macros
PCL symbol sets
PCL fonts
data, Type 1 fonts, demo files
(case sensitive)
filetype must be one of the following:
PostScript font
PCL scalable font
PCL bitmap font
PCL macro
User Data
PostScript font
Demo
PCL scalable font
PCL bitmap font
PCL macro
PCL symbol set
PPDS bitmap font
PCL XL user stream
PJL