Recovering Lost Passwords
Use the LQUERYSEED and LBYPASSPASSWORD commands to recover lost
passwords.
Syntax:
@PJL LQUERYSEED[<CR>]<LF>
@PJL LBYPASSPASSWORD KEY = "key"[<CR>]<LF>
Use the following steps to retrieve lost passwords:
1
Send the LQUERYSEED command to the printer by one of the host
computer interfaces.
This command causes a value, the "seed," to display on the printer operator
panel, through MarkVision or, if there isn't an LCD panel, to print on the Menu
Settings Page. The value of the "seed" determines the
2
Obtain the
You must have the "seed" value.
3
Send the @PJL LBYPASSPASSWORD command to the printer by any port.
If the correct
The directory indicates the appropriate passwords for the flash or disk.
from the Lexmark Customer Support Center.
key
is specified, a modified version of the directory is produced.
key
3-91
.
key
PJL