Unlocking A Protected File Or Device For The Current Job - Lexmark T630n VE Reference Manual

Unlocking a Protected File or Device for the Current Job

The file or device unlocked by the execution of this command is automatically
re-locked upon execution of the EOJ command or by a printer language change.
Syntax:
@PJL LDECLARE LRESOURCE : "device:filename.filetype"
LRWLOCKJ = "password"[<CR>]<LF>
@PJL LDECLARE LRESOURCE : "device:filename.filetype"
LWLOCKJ = "password"[<CR>]<LF>
LRESOURCE : "device:filename.filetype"
Values for "
LRWLOCK = "password"
device:filename.filetype
device flash flash1
,
filename
A unique identifier for a file, such as the macro ID for a PCL
macro, the symbol set ID for a PCL symbol set, the font ID for a
PCL font, or the actual file name for data, Type 1 fonts, and
demo files as shown on the Directory. The
sensitive.
filetype
An identifier that categorizes the file, such as
macros or
beginning on page 3-87 for a complete list of the supported file
types. The
LWLOCK = "password"
or
See "Printer Unique LRESOURCE Variables" on page 3-52 for information about
LRWLOCK = "password"
values for
3-97
" are:
disk disk1
, , or (case insensitive)
p5symset
for PCL symbol sets. See the table
filetype
is case sensitive.
Parameters
LWLOCK = "password"
and
PJL
filename
is case
p5macro
for PCL
parameters.