System Board Switches - HP XM600 - Kayak - 128 MB RAM Troubleshooting Manual

NOTE
Configuration Problems

System Board Switches

System Board Switches
There are ten system board switches used for configuration, numbered
from 1 to 10. A certain number of these are reserved (switches 1, 2, 3,
4, 5) and should not be modified, otherwise it could lead to a system
failure.
Default
Switch
Position
1-5
6
7
8
9
10
A limited number of early HP Kayak XM600 system boards have 20 configuration
switches. Switches 11-20 are reserved and should be set as follows: 12,13,15 and 16 to
ON, others to OFF
36
OFF Reserved. Do Not Change
Default Settings
ON Enables keyboard power-on using the space
bar.
OFF disables this option.
OFF Enables normal modes.
ON enables the BIOS recovery mode at next
boot.
OFF Retains CMOS memory.
ON clears CMOS memory at next boot.
OFF Enables User and System Administrator
passwords.
ON clears the passwords at next boot.
ON Selects the chassis type.
ON = minitower
Function: