Step 5-Completing Installation; Japanese 日本語 - HP Workstation xw4000 Series Hardware Installation

3. Secure the assembly into the rack by tightening the silver captive screws (1).
Figure 6
NOTE:
pull the handle to slide the assembly out of the rack until the latches in the tray (2) engage the
stop feature. Reach under the assembly and release the latches (2) to disengage the tray from
the rails.
CAUTION:
Step 5—Completing installation
1. Reconnect power to the workstation.
2. Restore power to the workstation.
Japanese 日本語
This document is available in Japanese. See http://www.hp.com/support/manuals, then select your
product and select Japanese from the drop down Manual Language menu.
このドキュメントは日本語版が用意されています。http://www.hp.com/support/manuals
し、ご使用のワークステーション製品を選択し、Manual Language ドロップダウン メニューから
Japanese を選択してください。
6 Rack mount tray installation
Completing installation
To remove the assembly from the rack, loosen the silver captive screws (1), and then
For removal, the workstation must be supported once the latches are disengaged.
にアクセス
ENWW