Using The Hp Setup Program - HP Vectra XA 6/xxx User Manual

3 Troubleshooting Your PC
The HP Summary Screen and Setup Program
When you press
following one, will appear:
XA/6xxx - Copyright 1996 Hewlett-Packard - GZ.xx.xx
BIOS Version
CPU Date Code
System RAM
Bank A
Bank B
Bank C
Video RAM
System Cache
Video Device
1st IDE Device
2nd IDE Device
3rd IDE Device
4th IDE Device
ISA PnP : Not Installed
ISA PnP : Not Installed
<F1> to continue, <F2> to run Setup, <F10>to power off, <F5> to retain
This screen gives you a summary of the current configuration
settings of your PC.

Using the HP Setup Program

1 Turn on the display and then the PC. If the PC is already turned on,
save your data and exit all programs, then restart the PC. Consult
your operating system documentation for any special instructions
concerning turning off and then restarting your PC.
54 English
, the HP Summary Screen, similar to the
: GZ.xx.xx PC Serial Number
: N/A LAN Mac Address
: 16 MB COM1
: 8 MB (EDO) COM2
: None COM3
: None COM4
: 1 MB LPT1
: None LPT2
: Matrox LPT3
: HDD 848 MB Flexible Disk A
: None Flexible Disk B
: None Display type
: None
PCI Slot #1
PCI Slot #2
PCI Slot #3
: FR54011111
: 08-0009-85-03-00
: 3F8H (Serial A)
: 2F8H (Serial B)
: None
: None
: 378H
: None
: None
: 1.44 MB
: None
: Not Available
: Not Installed
: Not Installed
: Not Installed