HP Vectra XA 6/xxx User Manual page 70

3 Troubleshooting Your PC
Configuring Your Network Connection
To enable the Remote-Power mode:
1 Use the or
Menu Items", in the HP Setup program).
2 Press to highlight the line
select the submenu.
3 Highlight the line
setting to
[Enabled]
4 To protect the remotely started PC from unauthorized use it is
advisable to enable starting with the keyboard locked.
5 It is also advisable to disable both Start from Flexible Disk and Start
from CD-ROM to prevent the PC booting from any disk which may
have been accidently left in the drives.
a Press , then use the
menu.
b Press to highlight the line
to select the submenu.
c Press to go to the
or to change the option to
d Press to go to the
to change the option to
60 English
key to select the
Power
Power-On
and press
Network
.
or
Start-Up Center
Start From Flexible Disk
Start From CD-ROM
.
[No]
menu (refer to "Power
and press
or to change the
key to select the
Security
and press
line. Press
.
[No]
line. Press
to
or