Using The Load Command Line Options - HP Tc2110 - Server - 128 MB RAM Installation And Configuration Manual

Chapter 5
load [pathname]adpt160m.ham [options]
For example, the command line to load the driver from the c:\nwserver directory,
with the verbose= option on is:
load c:\nwserver\adpt160m verbose=y
Command line options are not case sensitive. Placing commas between command
line options is optional. See
values.
To modify the startup.ncf file, follow these steps:
NOTE
1. Type load install at the NetWare prompt and press Enter.
2. Select the appropriate menu choice that allows you to edit the startup.ncf file.
3. Make the necessary changes. When you are done, press Esc.

Using the Load Command Line Options

You can specify several command line options when the driver is loaded. The
available options are described in the table below. This table describes command
line options for the <File Name>adpt160m.ham driver for Ultra3 SCSI host bus
adapter.
"Using the Load Command Line Options"
You can also use your DOS text editor to modify the
startup.ncf file.
Novell NetWare Installation
for possible
47