Netware 5.0; Dos Drivers For Cd-Rom Access - HP Tc2110 - Server - 128 MB RAM Installation And Configuration Manual

Chapter 5
9. Select No not to save existing file, Yes to save existing file nwpaload.nlm.
10. Select Save parameter and continue, and press Enter.
11. To install additional adapters, follow the procedures from
12. When complete, select "Continue the installation" to complete the installation.

NetWare 5.0

Follow these instructions only if you are installing NetWare 5.0 for the first time:
1. Begin installation of NetWare 5.0 on your server as instructed in your NetWare
documentation.
2. When a screen appears that asks you to add device drivers, select Modify and
press Enter.
3. Select "Storage adapters," and press Enter.
4. Press Insert to add storage drivers.
5. Press Insert to add an unlisted driver.
6. Insert the HP Ultra3 Family Manager Set disk for NetWare into your floppy disk
drive.
7. Press F3 and enter a:\netware\v5_xx as the path to the <File
Name>adpt160m.ham driver for NetWare.
8. Select adpt160m.ham and press Enter.
9. Select "Return to driver" list, and press Enter.
10. To install additional adapters, follow the procedures from
11. When complete, select Continue to complete the installation.

DOS Drivers for CD-ROM Access

The CD-ROM drivers need to be installed only if DOS access to a CD-ROM drive
attached to a SCSI host adapter is required. If NetWare is already installed, or if the
CD-ROM drive is not connected to a SCSI adapter, these drivers do not need to be
copied or installed. However, you may choose to install these drivers if you are
having trouble accessing your CD-ROM from NetWare.
NOTE
44
You do not need these drivers for Windows NT or UNIX.
Novell NetWare Installation
Step 5.
Step 4.