Microsoft Windows 2000; Installation; Installing The Driver When Installing Windows 2000 - HP Tc2110 - Server - 128 MB RAM Installation And Configuration Manual

4 Microsoft Windows 2000

Installation

This chapter explains how to install the HP Ultra3 Family Manager Set driver for
Windows 2000.
If you are performing a first-time Windows 2000 installation, see
Driver When Installing Windows 2000"
your system, see
on page 32.)
Installing the Driver When Installing
Windows 2000
1. Start your system with the Windows 2000 Operating System CD-ROM disk in
your CD-ROM drive.
NOTE
2. You may see a message:
Press any key to boot from CD.
3. After Windows 2000 has completed installation, please reinstall your SCSI
driver from the Device Manager. Follow the steps in
When Windows 2000 is Already Installed"
driver is installed.
"Installing the Driver When Windows 2000 is Already Installed"
When using a CD-ROM drive to install Windows 2000 from
the bootable CD-ROM, make sure Bootable CD-ROM
support is enabled in either the system or SCSI BIOS setup
utility. If these options are not available, boot from the
Windows 2000 floppy disks.
. If Windows 2000 is already installed in
"Installing the Driver
on page 32 to ensure the desired
"Installing the
31