Using Advanced Configuration Parameters; Using Windows Nt Scsi Parameters - HP Tc2110 - Server - 128 MB RAM Installation And Configuration Manual

Chapter 3
7. Insert the HP Ultra3 Family Manager Set disk for Windows NT into drive A.
8. From the Copy Manufacturer's File From text box, type a:\nt4, and click OK.
9. In the Install Driver window, Click OK.
10. Click the New button when asked if you want to use the currently installed
driver(s) or install new one(s).
11. Type a:\nt4 again, and click Continue. The driver is now installed.
12. You must restart your computer for the changes to take effect. Click Yes to
restart your computer. Click No to return to the SCSI Adapters window.

Using Advanced Configuration Parameters

Advanced users may use software parameters to alter the configuration of the
Windows NT device drivers supplied by HP. All Windows NT configuration
information is stored in a data structure called the Registry. You can edit this
information through a tool called the Registry Editor.
CAUTION

Using Windows NT SCSI Parameters

Follow the instructions below to enter the registry values that affect how the
Windows NT SCSI manager interprets the generic configuration information of
SCSI device drivers. All SCSI host adapters installed in your system are affected by
the values you enter here. A list of valid values follows:
NOTE
·
DisableTaggedQueuing — A nonzero value indicates that the SCSI host
adapter disables tagged queueing for SCSI devices. The data type for this value
is REG_SZ.
Do not edit your registry unless it is absolutely necessary. If
there is an error in your registry, your server may become
nonfunctional.
The following value keys are case-sensitive and must be
entered exactly as shown.
Microsoft Windows NT Installation
21