●
●
NOTE:
8.
Replace the side access panel and metal side cover. See
Access Panel and Metal Side Cover on page 15
9.
Install the stand, if you will be using the thin client unmounted in a vertical orientation. See
the Stand on page 5
10.
Replace the secure USB compartment cover. See
Compartment Cover on page 13
11.
Reconnect any external devices and power cords.
12.
Turn on the monitor, the thin client, and any devices you want to test.
13.
Load any necessary drivers.
NOTE:
support.html.
14.
Reconfigure the thin client, if necessary.
12
Chapter 2 Hardware Changes
Installing a Secondary Flash Memory Module on page 19
Installing a Second SO-DIMM on page 20
Option kits include more detailed installation instructions.
for more information.
You can download select hardware drivers from HP at
for more information.
Removing and Replacing the Secure USB
for more information.
Removing and Replacing the Side
http://www.hp.com/country/us/eng/
Installing
ENWW
Need help?
Do you have a question about the st5747 - Streaming Client and is the answer not in the manual?
Questions and answers