Installing Flanges - Epson SureLab D3000 - Single Roll Operation Manual

Installing Flanges

A
Remove the new paper from its packaging, and stand it vertically on the flat surface. Next, wipe away paper
particles from the top of the paper with a damp cloth.
B
Set the Flange on the paper surface from which paper particles have been wiped away.
Place the paper straight to the Flange.
Tip:
Either Flange can be set.
C
Position the paper so that the surface to which the Flange has not been set is face up.
Next, wipe away paper particies with a damp cloth.
Replacing Paper
46