Epson SureLab D3000 - Single Roll Operation Manual page 112

Document
Hide thumbs Also See for SureLab D3000 - Single Roll:
Table of Contents

Advertisement

Error ID
2117
The print settings and the type of loaded paper differ.
Load paper: Width = xxxx mm, Type = xxxx, and then click [OK].
Click [Front] to print from the front roll, or click [Rear] to print
from the rear roll.
2118
The print settings and the type of loaded paper differ.
Load paper: Width = xxxx mm, Type = xxxx, and then click [OK].
Click [Front] to print from the front roll.
2119
The print settings and the type of loaded paper differ.
Load paper: Width = xxxx mm, Type = xxxx, and then click [OK].
Click [Rear] to print from the rear roll.
2120
The print settings and the width of the loaded paper differ.
Load paper: Width = xxxx mm, Type = xxxx, and then click [OK].
Click [Front] to print from the front roll, or click [Rear] to print
from the rear roll.
2121
The print settings and the width of the loaded paper differ.
Load paper: Width = xxxx mm, Type = xxxx, and then click [OK].
Click [Front] to print from the front roll.
2122
The print settings and the width of the loaded paper differ.
Load paper: Width = xxxx mm, Type = xxxx, and then click [OK].
Click [Rear] to print from the rear roll.
2123
The print settings, and the width and type of loaded paper
differ.
Load paper: Width = xxxx mm, Type = xxxx, and then click [OK].
Click [Front] to print from the front roll, or click [Rear] to print
from the rear roll.
2124
The print settings, and the width and type of loaded paper
differ.
Load paper: Width = xxxx mm, Type = xxxx, and then click [OK].
Click [Front] to print from the front roll.
2125
The print settings, and the width and type of loaded paper
differ.
Load paper: Width = xxxx mm, Type = xxxx, and then click [OK].
Click [Rear] to print from the rear roll.
2126
The front roll paper does not match the print settings.
Load paper: Width = xxxx mm, Type = xxxx, and then click [OK].
Click [Front] to print from the front roll.
2127
The rear roll paper does not match the print settings.
Load paper: Width = xxxx mm, Type = xxxx, and then click [OK].
Click [Rear] to print from the rear roll.
Troubleshooting
Message
112
What to do
Reload the correct paper.
To continue printing, click Front or
Rear to select the paper you want to
use.
U "Replacing Paper" on page 26
Reload the correct paper.
To continue printing, click Front or
Rear to select the paper you want to
use.
U "Replacing Paper" on page 26

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl-d3000

Table of Contents