Epson SureLab D3000 - Single Roll Operation Manual page 117

Error ID
7301 A mechanical error occurred.
Check if there is any paper remaining inside the printer, and
then click [OK].
If the error continues to occur, a malfunction may have
occurred. Contact a technical representative.
6107 Parts have reached the end of their service life. (xxxx)
6109 to 6110
Contact a technical representative.
5001 The printer is disconnected.
Check the cable connection, and then turn the printer back on.
If the error continues to occur, contact a technical
representative.
5002 A network communication error occurred.
Check the LAN cable connection.
If the error continues to occur, contact a technical
representative.
7501 A printer system error occurred.
Turn off the printer, and then perform a Pre-operation Check.
If the error continues to occur, a malfunction may have
occurred. Contact a technical representative.
Troubleshooting
Message
117
What to do
Check if there is any paper remaining
inside the printer, and then click OK.
Contact a technical representative if
the error continues to occur.
Contact a technical representative
and request replacement for the parts
displayed in (xxxx).
Check the cable connection, and then
turn the printer back on.
U "Starting up and Shutting down
the Printer" on page 20
If the error is not cleared, contact a
technical representative.
Turn off the printer, and then perform
a Pre-operation Check.
U "Starting up and Shutting down
the Printer" on page 20
If the error continues to occur, a
malfunction may have occurred.
Contact a technical representative.