Epson SureLab D3000 - Single Roll Operation Manual page 85

B
Click Paper Settings (022) from Print Condition Settings/Inspections (02).
Item
Front Paper Type
Paper Surface
Type
Paper Width
Paper Level
Rear Paper Type
Paper Surface
Type
Paper Width
Paper Level
Back
Help
Apply
Setup and Maintenance
Displays the type of paper (the paper name) loaded in the front roll paper feeder.
Displays the paper surface type (the processing type for the paper surface) loaded in
the front roll paper feeder.
Displays the width of the paper loaded in the front roll paper feeder.
Displays the width detected by the printer.
Displays the remaining amount of paper loaded in the front roll paper feeder.
If the displayed amount of paper remaining differs from the actual amount, enter the
correct amount of paper and then click Apply.
Displays the type of paper (the paper name) loaded in the rear roll paper feeder.
Displays the paper surface type (the processing type for the paper surface) loaded in
the rear roll paper feeder.
Displays the width of the paper loaded in the rear roll paper feeder.
Displays the width detected by the printer.
Displays the remaining amount of paper loaded in the rear roll paper feeder.
If the displayed amount of paper remaining differs from the actual amount, enter the
correct amount of paper and then click Apply.
Click to close the Settings/Maintenance screen.
Click to display the Help.
Click to apply any changed settings.
85
Explanation