Troubleshooting; When An Error Is Displayed; Warning Buzzer And Light Displays - Epson SureLab D3000 - Single Roll Operation Manual

Troubleshooting

When an Error is Displayed

If an error occurs in the printer, the error is indicated by a warning buzzer and lights, and an error message is
displayed on the Client PC.

Warning Buzzer and Light Displays

Warning Buzzer and lights indicate the following problems. Carry out solutions according to the problem.
Light Displays
0 light is lit
0 light is lit
Ink status light is lit
0 light is lit
Paper status light is lit
Troubleshooting
Warning Buzzer
The warning Operations stopped due to an error occurring, the
buzzer sounds printer is recovering from an error, or a service call
until you start to error has occurred.
clear the error or
Check the error ID on the Client PC. See the
press the Paper
following section or the online help to solve the
type setting
problem.
switch.
U "Errors and Solutions" on page 110
Contact a technical representative if a service call
error has occurred.
When the Ink status light is lit, the amount of ink
remaining in the cartridge has fallen below the
minimum limit, or an error has occurred.
Replace the ink cartridge.
U "Replacing Ink Cartridges" on page 57
If the Paper status light is on, there is no paper in
the roll paper feeder, or paper is running low.
Load paper in the roll paper feeder with the lit
Paper status light.
U "Replacing Paper" on page 26
108
Problem
What to do