Epson SureLab D3000 - Single Roll Operation Manual page 141

EMC
Warning:
!
This is a class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
Type
Ink type
Use by date
Print quality guarantee
expiry
Storage temperature
Capacity
Cartridge dimensions
(W x D x H)
Note:
O The ink freezes if left at below 5°F (-15°C) for a long time. If it does freeze, leave it at room temperature (77 °F
[25 °C]) for at least four hours (without condensation).
O Do not disassemble or refill the ink cartridge.
Type
Number installed
Environmental
Conditions
Cartridge dimensions
(W x D x H)
Appendix
Safety and Approvals
FCC part 15 subpart B class A
CAN/CSA-CEI/IEC CISPR 22 Class A
AS/NZS CISPR 22 Class A
EMC Directive 2004/108/EC
Ink Specifications
Ink Cartridges
Water-based ink
Three years from date of production
Six months from installation
In packaging: −4 to 104 °F (−20 to 40 °C); 1 month at 104 °F (40 °C)
Installed: −4 to 104 °F (−20 to 40 °C); 1 month at 104 °F (40 °C)
Transporting: −4 to 140 °F (−20 to 60 °C); 1 month at 104 °F (40 °C), and 72 hours at 140 °F (60 °C)
700 ml
1.6 x 12.6 x 4.2 inches (40 x 320 x 107 mm)
Maintenance Tank Specifications
Maintenance tank for waste ink
1
In packaging: −4 to 104 °F (−20 to 40 °C) temperature, 20 to 85% humidity
Installed: Follows general specifications
Transporting: −4 to 140 °F (−20 to 60 °C) temperature, 5 to 85% humidity; 1 month at 104 °F
(40 °C), and 120 hours at 140 °F (60 °C)
4 x 9.3 x 3.1 inches (102.5 x 235 x 79.5 mm)
EN 55022 Class A
EN 55024
EN 61000-3-2
EN 61000-3-3
141