Operations During Playback; Playing Video And Audio Equipment; Basic Operation - Denon DHT-589BA Owner's Manual

ENGLISH
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
SOURCE SELECT
<DIMMER>
<STATUS> BAND
<SPEAKERS> TUNING
PHONES jack <PRESET CHANNEL>
[Front]
[TUNER]
SOURCE
SELECT
[MASTER
VOLUME]
SHIFT
TUNING
[CHANNEL + –]
[MUTING]
[SOURCE
CONTROL 1]
[SOURCE
CONTROL 2]


Operations During Playback

Adjusting the Master Volume
BUTTON
<BUTTON>
Either turn
[BUTTON]
VOLUME]
.
[Variable range] – – – –80.0dB ~ +18.0dB
<MUSTER VOLUME>
SHIFT
ui
NOTE
The adjustable range will differ depending upon factors such as the
type of input signal and the channel level setting.
Turning Off the Sound Temporarily (Muting)
[MUTING]
Press
To cancel, press
ENTER,op
adjusting the master volume.
<VIDEO SELECT>
Listening with Headphones
Plug the headphones into the PHONES jack on the main
[Rear]
unit.
The sound from the speakers and pre-out connectors is automatically
SOURCE
cut.
SELECT
NOTE
[TUNER]
Be careful not to set the volume too high when using headphones.
Switching the front speakers
[V.SEL]
<SPEAKERS>
Press
TUNING
[MODE]
Video Select Function
BAND
Switch video input source while listening to audio signal.
[MEMORY]
<VIDEO SELECT>
Press
picture appears.
b To cancel, press
<MASTER VOLUME> [MASTER
or press
.
[MUTING]
again. Muting can also be canceled by
.
[V.SEL]
or until the desired
<VIDEO SELECT>
to select "SOURCE".
Checking the currently playing program source, etc.
<STATUS>
Press .
The current program source and various settings are indicated on
the display.
For details, refer to "Information" (vpage 33).
Switching the brightness of the display
<DIMMER>
Press .
Bright Dim
OFF Dark
When setting to "OFF", the display brightness of the menu setting in
operation changes to "Dark".
Playing Video and Audio
Equipment

Basic Operation

1
Prepare the equipment.
q Load the DVD, CD or other software in the player.
(vSee the operating instructions of the respective devices.)
w To play a video device, switch the monitor input.
(vSee the monitor's operating instructions.)
2
SOURCE SELECT
Use to select the input source.
3
Start playback.
(vSee the operating instructions of the respective devices.)
The remote control unit can be used to operate external devices.
See "Remote Control Unit Operations" (vpage 42).