Option Setup; A ~ D Volume Control; Auto Surround Mode; Direct Mode Setup - Denon DHT-589BA Owner's Manual

3. Option Setup

Make various other settings.
a ~ d Volume Control

Auto Surround Mode

f

Direct Mode Setup

g

Remote ID Setup

h
a ~ d Volume Control
Set the main zone volume setting.
[Display]
1 . S p 2 . I n 3 . O p
O p t i o n S e t u p
1 L i m i t : O F F
2 P . O n : L a s t
3 M u t e : F u l l
a Volume Limit
Make a setting for maximum volume.
[Selectable items]
OFF
: Do not set a maximum volume.
–20dB
: Set the maximum volume to –20 dB.
–10dB
: Set the maximum volume to –10 dB.
0dB
: Set the maximum volume to 0 dB.
s Power On Level
This sets the volume set when the main zone's power is turned on.
[Selectable items]
Last
: Use the memorized setting from the last session.
– – –
: Always use the muting on condition when power
[Variable range]
–80dB ~ +18dB
: Set the volume level when the power is turned on
b The variable level when upper limit has been set with "Volume
Limit" is "–80 dB ~ the set volume level" .
d Mute Level
This sets the amount of attenuation of the volume when the mute
E
mode is set in the main zone.
E
[Selectable items]
Full
: The sound is cut off entirely.
E
–40dB
: The sound is attenuated by 40 dB.
E
–20dB
: The sound is attenuated by 20 dB.
f Auto Surround Mode
Make setting for memorizing surround mode setting for each input
signal type.
[Display]
1 . S p 2 . I n
O p t i o n S e t u p
[Selectable items]
ON
: Memorize settings. Most recently stored surround mode is
automatically selected.
OFF
: Do not memorize settings. Surround mode does not change
according to input signal.
For details on how to select, set and cancel settings for each menu, see "System Setup Operation" (vpage 20).
is turned on.
in units of 1 dB.
3 . O p
E
E
4 A u t o S u r r . : O N
The auto surround mode function lets you store in the memory the
surround mode last used for playing the three types of input signals
listed below.
q Analog and PCM 2-channel signals (STEREO)
w 2-channel signals of Dolby Digital, DTS or other multi-channel
format (DOLBY PLg Cinema)
e Multi-channel signals of Dolby Digital, DTS or other multichannel
format (DOLBY/DTS SURROUND)
b Default settings are indicated in ( ).
g Direct Mode Setup
Select MultEQ use for DIRECT mode playback.
[Display]
1 . S p 2 . I n 3 . O p
O p t i o n S e t u p
5 D i r e c t : O F F
[Selectable items]
ON
: Use MultEQ.
OFF
: Do not use MultEQ.
h Remote ID Setup
Set remote control ID.
[Display]
1 . S p 2 . I n 3 . O p
O p t i o n S e t u p
6 R e m o t e I D : 1
[Selectable items] 1 2 3
NOTE
When using the AVR-589 with only the included remote control unit
(RC-1104), there is no need to make settings.
When using a separately sold remote control unit (RC-7000CI, etc.),
this function can be used. Match the ID setting of the remote control
unit and the receiver.
ENGLISH
E
E
E
E
4