Cd Player; Ipod; Tv/Cable Tuner - Denon DHT-589BA Owner's Manual

CD Player

Select the terminal to use and connect the device.
CD player
R
L
L R
When using an optical cable for the digital audio connection, make
the settings at "System Setup" – "Input Setup" – "Digital In
Assign" (vpage 24).

iPod

®
Use a DENON control dock for iPod (ASD-1R, ASD-11R, ASD-3N
or ASD-3W, sold separately) to connect the iPod to the AVR-589.
For instructions on the control dock for iPod settings, refer to the
control dock for iPod's operating instructions.
iPod
R L
R L
• With the default settings, the iPod can be used connected to the
VCR (iPod) connector.
• To assign the iPod to a connector other than VCR (iPod), make
the settings at "System Setup" – "Input Setup" – "iPod Assign"
(vpage 24).
NOTE
To playback iPod Video or Photos on a TV monitor, connect
the TV to the S-Video Out terminal of AVR-589.

TV/CABLE Tuner

Select the terminal to use and connect the device.
NOTE
The audio signal input to the HDMI input connector cannot be
played on the AVR-589. Input the audio signal to the digital audio input
connector or analog audio input connector.
TV tuner
L R
L R
When using a coaxial cable for the digital audio connection, make the settings
at "System Setup" – "Input Setup" – "Digital In Assign" (vpage 24).
NOTE
Because video signals are output from the AVR-589's monitor output terminal
in the same format as the video input signals, the monitor output terminal
should be of the same type as the terminal used for input.
ENGLISH