Playback; Preparations; Turning The Power On; Selecting The Input Source - Denon AVR-2308 Owner's Manual

SOURCE SELECT
<SOURCE> <PHONES>
<POWER> <SPEAKER>
<ON/STANDBY>
[Front]
[OFF]
SOURCE SELECT
[MODE
SELECTOR 1]
[Rear]
SOURCE SELECT
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
MASTER VOLUME

Playback

Preparations

Turning the Power On

1
<POWER>
Press
The power indicator lights red and the power is set to the standby
mode.
2
<ON/STANDBY>
Press
The power indicator flashes green and the power turns on.
[ON/SOURCE]
Turning the Power Off
q Press <ON/STANDBY> or [OFF].
The power is set to the standby mode.
w Press <POWER>.
The power indicator turns off, and so does the power.
NOTE
Power continues to be supplied to some of the circuitry even when
MASTER VOLUME
the power is in the standby mode. When leaving home for long periods
of time or when traveling, either press <POWER> to turn off the power,
[MUTING]
or unplug the power cord from the power outlet.

Selecting the input source

Operation on the main unit
<SOURCE SELECT>
Turn
If "Rec Select" is selected for the input source, press <SOURCE> before
turning <SOURCE SELECT>.
.
[ON/SOURCE].
or
.
Operation on the remote control unit
[MODE SELECTOR 1]
Set to "AUDIO" then press
[SOURCE SELECT]
.
The desired input source can be selected directly.

Operations During Playback

Adjusting the Master Volume
<MASTER VOLUME>
Either turn
VOLUME]
.
Turning Off the Sound Temporarily (Muting)
[MUTING]
Press .
To cancel, press [MUTING] again. Muting can also be canceled by
adjusting the master volume.
Listening with Headphones
<PHONES>
Plug the headphones into
The sound from the speakers and pre-out connectors is automatically
cut.
NOTE
Be careful not to set the volume too high when using headphones.
Switching the front speakers
<SPEAKER>
Press .
ENGLISH
[MASTER
or press
.