Solving Printer Problems - HP Pro 3330 Maintenance And Service Manual

Computer appears to be locked up while recording audio.
Cause
The hard disk may be full.
Line-in jack is not functioning properly.
Cause
Jack has been reconfigured in the audio driver or application
software.
There is no sound or sound volume is too low.
Cause
The application is set to use a different audio device than
speakers.
Some applications can select which audio output device is
used.
The operating system controls may be set to use a different
audio device as the default output device than what is
expected.

Solving Printer Problems

If you encounter printer problems, see the documentation that came with the printer and to the
common causes and solutions listed in the following table.
Table D-8 Solving Printer Problems
Printer will not print.
Cause
Printer is not turned on and online.
The correct printer drivers for the application are not
installed.
If you are on a network, you may not have made the
connection to the printer.
Printer may have failed.
Solution
Before recording, make sure there is enough free space on
the hard disk. You can also try recording the audio file in a
compressed format.
Solution
In the audio driver or application software, reconfigure the
jack or set the jack to its default value.
Solution
Some graphics cards support audio over the DisplayPort
connection, so multiple audio devices may be listed in
Device Manager. Make sure the correct device is being
used.
Make sure the application has selected the correct audio
device.
Set the operating system to use the correct audio device.
Solution
Turn the printer on and make sure it is online.
1. Install the correct printer driver for the application.
2. Try printing using the MS-DOS command:
DIR C:\ > [printer port]
where [printer port] is the address of the printer being
used. If the printer works, reload the printer driver.
Make the proper network connections to the printer.
Run printer self-test.
Solving Printer Problems 169