HP Pro 3330 Maintenance And Service Manual page 110
Microtower small form factor
Hide thumbs
Also See for Pro 3330:
- Maintenance & service manual (226 pages) ,
- Illustrated parts & service map (3 pages) ,
- User manual (74 pages)
Table of Contents
Advertisement
b.
If you are removing a PCI Express x16 card, pull the retention arm on the back of the
expansion socket away from the card and carefully rock the card back and forth until the
connectors pull free from the socket. Pull the expansion card straight up from the socket
then away from the inside of the chassis to release it from the chassis frame. Be sure not to
scrape the card against the other components.
NOTE:
X16 card is shown below.
Figure 8-11
6.
Store the removed card in anti-static packaging.
7.
If you are not installing a new expansion card, install an expansion slot cover to close the open
slot.
CAUTION:
expansion slot cover for proper cooling of internal components during operation.
100 Chapter 8 Removal and Replacement Procedures – Small Form Factor (SFF) Chassis
PCI cards and PCI Express x1 cards do not have the retention arm. PCI Express
Removing a standard PCI expansion card
After removing an expansion card, you must replace it with a new card or
Advertisement
Table of Contents
