HP Pro 3330 Maintenance And Service Manual page 167

Table D-3 Solving Diskette Problems
Diskette drive light stays on.
Cause
Diskette is damaged.
Diskette is incorrectly inserted.
Drive cable is not properly connected.
Drive not found.
Cause
Cable is loose.
Removable drive is not seated properly.
The device has been hidden in Computer Setup.
Diskette drive cannot write to a diskette.
Cause
Diskette is not formatted.
Diskette is write-protected.
Writing to the wrong drive.
Not enough space is left on the diskette.
Diskette is damaged.
Solution
In Microsoft Windows XP, right-click Start, click Explore,
and select a drive. Select File > Properties > Tools. Under
Error-checking click Check Now.
In Microsoft Windows Vista and Windows 7, right-click Start,
click Explore, and right-click on a drive. Select
Properties then select the Tools tab. Under Error-checking
click Check Now.
Remove diskette and reinsert.
Reconnect drive cable. Ensure that all four pins on the
diskette power cable are connected to the drive.
Solution
Reseat diskette drive data and power cable.
Reseat the drive.
Run the Computer Setup utility and ensure Device Available
is selected for the Legacy Diskette in Security > Device
Security.
Solution
Format the diskette.
1. From Windows Explorer select the disk (A) drive.
2. Right-click the drive letter and select Format.
3. Select the desired options, and click Start to begin
formatting the diskette.
Use another diskette or remove the write protection.
Check the drive letter in the path statement.
1. Use another diskette.
2. Delete unneeded files from diskette.
Replace the damaged disk.
Solving Diskette Problems 157