4 Replacement Procedures
4.19 LCD Module
Removing the LCD Module
To remove the LCD module, first remove the display assembly and display mask, then follow
the steps below:
1.
Remove one M2.5x3 black screw securing the LCD cable.
2.
Remove two M2.5x6 black screws securing the LCD module bracket to LCD cover.
3.
Disconnect the two connectors on either side of the FL inverter board.
[CONFIDENTIAL]
4-36
Figure 4-39
Removing the LCD module screws
Figure 4-40
Removing the connectors
Detroit 20 /Detroit 20E Series Maintenance Manual
4.19 LCD Module