4.6 Expansion Memory
4.6
Expansion Memory
Removing the Expansion Memory
To remove the memory module, make sure the computer is in boot mode:
1.
Remove one M2.5x4 screw securing the expansion memory compartment cover.
2.
Push the latches securing the memory module to the outside to release it (A). A spring
will force one end of the module up (B).
3.
Grasp the module and pull it out (C).
4.
Seat the cover and secure its screw.
CAUTION: Do not touch the connectors on the expansion memory or on the
computer. Debris on the connectors may cause memory access problems.
Detroit 20 /Detroit 20E Series Maintenance Manual
Figure 4-8
Removing the expansion memory
4 Replacement Procedures
[CONFIDENTIAL]
4-13