4 Replacement Procedures
Installing the Expansion Memory
CAUTION: Do not touch the connectors on the expansion memory or on the
computer. Debris on the connectors may cause memory access problems.
To install a memory module, follow the steps below and refer to the figures in the preceding
section:
1.
Fit the module's connectors into the computer's connectors at about a 45-degree angle
and press the module carefully to ensure a firm connection (A).
2.
Push the module down so it lies flat (B). Latches on either side will click into place to
secure the module.
[CONFIDENTIAL]
4-14
Figure 4-9
Installing the expansion memory
4.6 Expansion Memory
Detroit 20 /Detroit 20E Series Maintenance Manual