Toshiba Equium A110-233 User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Equium A110-233
  6. User manual

Toshiba Equium A110-233 User Manual

Toshiba equium a110-233: user guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Equium A110-233

Summary of Contents for Toshiba Equium A110-233

  • Page 2 © 2006 by TOSHIBA Corporation. All rights reserved. Under copyright law, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.

  • Page 3: Safety Instructions

    TruSurround XT, WOW HD, Circle Surround Xtract, SRS and are trademarks of SRS Labs, Inc. TruSurround XT, WOW HD, Circle Surround Xtract, TruBass, SRS 3D, Definition and FOCUS technologies are incorporated under license from SRS Labs, Inc. Other trademarks and registered trademarks not listed above may be used in this manual.
  • Page 4 ■ Before you connect the computer to a power source, ensure that the voltage rating of the AC adapter matches that of the available power source. 115V/60Hz in most of North and South America and some Far Eastern countries such as Taiwan. 100 V/50Hz in eastern Japan and 100 V/60Hz in western Japan.
  • Page 5 Use only the battery pack that came with the computer or an optional battery pack. Use of the wrong battery could damage your computer. TOSHIBA assumes no liability for any damage in such case. User’s Manual A110 Series...
  • Page 6 This product and the supplied accessories are designed to observe the related EMC (Electromagnetic Compatibility) and safety standards. However, Toshiba cannot guarantee that this product still observes these EMC standards if accessories or cables not manufactured / distributed by Toshiba are connected or implemented. To avoid in general EMC problems, the following advice should be observed: ■...
  • Page 7 IEC 825 and EN60825 on class 1 laser product. This computer is equipped with one of the optical drive in the following list according to the model. Manufacturer Toshiba Samsung Storage Technology Panasonic Communications Co., LTD. TEAC Corporation Pioneer Corporation NEC Corporation Hitachi LG Data Storage, Inc.
  • Page 8 International precautions ■ This drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
  • Page 9 A110 Series VORSICHT: Dieses Gerät enthält ein Laser- System und ist als "LASERSCHUTZKLASSE 1 PRODUKT" klassifiziert. Für den richtigen Gebrauch dieses Modells lesen Sie bitte die Bedienungsanleitung sorgfältig durch und bewahren diese bitte als Referenz auf. Falls Probleme mit diesem Modell auftreten, benachrichtigen Sie bitte die nächste "autorisierte Service-Vertretung".

  • Page 10: Important Notice

    Modem warning notice Conformity Statement The equipment has been approved to [Commission Decision "CTR21"] for pan- European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.

  • Page 11: General Precautions

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigours of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.

  • Page 12: Working Environment

    Any consequences resulting from the use of this product in working environments that are not approved or the use is restricted are not the responsibility of Toshiba Corporation. The consequences of the use of this product in those working environments may be: ■...

  • Page 13: Wireless Lan And Your Health

    Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

  • Page 14: Limitation Of Liability

    Limitation of Liability For damage occurring due to an earthquake or thunder, fire beyond our responsibility, action by third party, other accident, intentional or accidental mistakes by a user, misuse or use under abnormal conditions, we do not take any responsibility. For incidental damage (loss of business profit, business interruption, etc.) occurring due to use or disability of the product, we do not take any responsibility.
  • Page 15 Warning Turn OFF the Wireless Communication switch of wireless products in a congested place, such as a crowded commuter train. Keep this product away from a cardiac pacemaker at least 22cm. Radio waves can potentially affect cardiac pacemaker operation, thereby causing respiratory troubles.

  • Page 16: Table Of Contents

    Table of Contents A110 Features Chapter 1 Features..........1-1 Special features .
  • Page 17 ±R Double Layer ......4-14 TOSHIBA Disc Creator ........4-17 TOSHIBA Direct Disc Writer .
  • Page 18 TOSHIBA support ........

  • Page 19: Manual Contents

    Preface Congratulations on your purchase of the A110 computer. This powerful notebook computer provides excellent expansion capability, including multimedia devices, and it is designed to provide years of reliable, high- performance computing. This manual tells how to set up and begin using your A110 computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
  • Page 20 User’s Manual Keyboard, describes special keyboard functions including Modes, gives details on the computer's Setup, introduces you to the TOSHIBA Hardware Setup Devices, describes the optional hardware available. provide technical information about your computer. A110 Series...

  • Page 21: Equipment Checklist

    ■ Microsoft ■ DVD Video Player ■ TOSHIBA Disc Creator ■ TOSHIBA Direct Disc Writer ■ TOSHIBA Power Saver ■ TOSHIBA ConfigFree User’s Manual When procedures require an action such as clicking an icon or entering text, the icon's name or the text you are to type in is represented in the type face you see to the left.
  • Page 22 TOSHIBA PC Diagnostic Tool ■ TOSHIBA Touch and Launch ■ TOSHIBA TouchPad On/Off Utility ■ TOSHIBA Zooming Utility ■ TOSHIBA SD Memory Card Format * ■ TOSHIBA Acoustic Silencer ■ TOSHIBA HW Setup ■ TOSHIBA Accessibility ■ TOSHIBA Virtual Sound ■...

  • Page 23: Chapter 1 A110 Features

    Basic features are described in a separate pamphlet. Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Features The A110 Series computer uses TOSHIBA's advanced Large Scale...
  • Page 24 Chipset Memory The graphics system in your computer may use part of the main system memory for graphics performance and therefore reduce the amount of system memory available for other computing activities. The amount of system memory allocated to support graphics may vary depending on the graphics system, applications utilized, system memory size and other factors.
  • Page 25 BIOS Power Battery Pack Disclaimer (Battery Life) For more information on the Disclaimer regarding Battery Life, please refer to the Chapter 10, Disclaimers. RTC Battery AC adapter Floppy Disk Drive devices User’s Manual 1MB Flash ROM for system BIOS Suspend to memory or hard disk drive Various Hotkey functions for system control Complete ACPI 1.0b functionality 4-cell Lithium Ion smart battery pack with...
  • Page 26 TouchPad Display Disclaimer (LCD) For more information on the Disclaimer regarding LCD, please refer to the Chapter 10, Disclaimers. Disks Fixed hard disk User’s Manual A TouchPad and control buttons in the palm rest enable control of the on-screen pointer. 15.4"...
  • Page 27 Disclaimer (HDD Drive Capacity) For more information on the Disclaimer regarding HDD Drive Capacity, please refer to the Chapter 10, Disclaimers. CD-RW/DVD-ROM drive User’s Manual Some models are equipped with a full-size CD-RW/DVD-ROM module that lets you record data to rewritable CD/CD-RWs as well as run either 12cm (4.72") or 8cm (3.15") CD/DVDs without using an adapter.
  • Page 28 DVD Super Multi drive supporting R Double Layer Computers in this series can be configured with multiple types of optical disc drive. For more information on the optical disc drives available, talk to your dealer. More information on using the optical disc drive can be found in Chapter 4, Slots (depending on configuration) PC Card...
  • Page 29 Universal Serial Bus i.LINK (IEEE1394a) TV Out Multimedia Sound system Headphone jack Microphone jack Communications (depending on configuration) Modem Wireless LAN Security User’s Manual The computer has three Universal Serial Bus (USB) ports that comply with the USB 2.0 standard, which enables data transfer speeds more than 40 times faster than USB 1.1 (which this computer also supports).

  • Page 30: Special Features

    Security Lock Slot Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Hotkeys Display Automatic Power off Hard Disk Drive Automatic Power Off System Automatic Standby/Hibernation...

  • Page 31: Utilities

    You can specify the setting in the TOSHIBA Power Saver utility. When battery power is exhausted to the point that computer operation cannot be continued, the system automatically enters Hibernation Mode and shuts itself down.
  • Page 32 TOSHIBA PC Diagnostic tool displays the basic information on the computer's configuration and allows some of the built-in devices functionality to be tested. You can start the TOSHIBA PC Diagnostic Tool as follows: Start All Programs TOSHIBA...
  • Page 33 TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy TOSHIBA TouchPad On/Off Utility TOSHIBA Disc Creator TOSHIBA Direct Disc Writer TOSHIBA Touch and Launch TOSHIBA Zooming Utility User’s Manual control of communication devices and network connections. ConfigFree also allows you to find...
  • Page 34 "F number" key. The Fn key remains active until another key is pressed. TOSHIBA Virtual Sound works as an audio filter using SRS TruSurround XT, SRS WOW HD, and SRS Circle Surround Xtract functions provided by SRS Labs, Inc.

  • Page 35: Options

    Two memory module can be installed in this computer. An additional battery pack can be purchased from your TOSHIBA dealer. Use it as a spare to increase your computer operating time. An additional battery pack can be purchased from your TOSHIBA dealer. Use it as a spare to increase your computer operating time.

  • Page 36: Chapter 2 The Grand Tour

    The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Certain types of notebook chassis are designed to accommodate all possible configurations for an entire product series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
  • Page 37 DC IN LED Power LED Battery LED Hard Disk Drive LED Multiple Digital Media Card Slot Access LED Multiple Digital Media Card Slot Wireless Communication Switch Wireless Communication LED Microphone Jack Headphone Jack Volume Control User’s Manual The DC IN LED indicates the computer is connected to the AC adapter and it is plugged into an AC power source.

  • Page 38: Right Side

    Right side The following figure shows the computer's right side. Optical Disc Drive Optical Disc Drive Optical Disc Drive User’s Manual Optical Disc Drive LED The right side of the computer The computer is configured with a full-size optical disc drive module that lets you run either 12 cm (4.72") or 8 cm (3.15") discs without using an adapter.

  • Page 39: Left Side

    Left side The following figure shows the computer's left side. RGB Monitor Port Fan Vents TV Out (S-Video) Port RGB Monitor Port Fan Vents To prevent possible over heating of the CPU, never block the fan vent. TV Out Port i.LINK (IEEE1394a) Port Universal Serial Bus...

  • Page 40: Back Side

    Back side The following figure shows the computer back panel. Modem Jack Security Lock LAN Jack Modem Jack Security Lock LAN Jack Universal Serial Bus (USB) Ports DC IN 19V Jack User’s Manual Universal Serial Bus (USB) Ports DC IN 19V Jack The back side of the computer In regions where an internal modem is installed as standard equipment, this jack lets you use a...

  • Page 41: Underside

    Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer. Expansion Memory Socket Fan Vent Battery Pack Latch Expansion Memory Socket Fan Vent To prevent possible overheating of the CPU, never block the fan vent. Battery Pack Latch Battery Pack Battery Pack Lock...

  • Page 42: Front With The Display Open

    Front with the display open The following figure shows the front of the computer with the display open. To open the display, push the latch on the front of the display and lift it up. Position the display at a comfortable viewing angle. Display Screen TouchPad TouchPad Control Buttons...
  • Page 43 Press the Internet button to open your default web browser. The button setting can be changed in TOSHIBA Controls properties. To access the TOSHIBA Controls properties, click start, click the Control Panel, click the TOSHIBA Controls icon.

  • Page 44: Keyboard Indicators

    If Random or Shuffle is selected in Windows or Previous advances to a random selection. Keyboard Indicators Arrow Mode Numeric Mode Caps Lock Optical Disc drive The computer will either have a CD-RW/DVD-ROM drive, or a single layer or dual layer DVD Super Multi drive supporting ±R Double Layer depending on its configuration.

  • Page 45: Writable Discs

    Code Writable discs This section describes the types of writable discs. Check the specifications for your drive to for the type of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Refer to Chapter 4, ■ CD-R discs can be written only once. The recorded data cannot be erased or changed.
  • Page 46 To recharge the battery, simply connect the AC adapter to a power source and the computer. See Chapter 6, Use of the wrong adapter could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC.

  • Page 47: Chapter 3 Getting Started

    Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: ■ Setting up your work space - for your health and safety Be sure also to read Instruction Manual for Safety & Comfort. This guide, which is included with the computer, explains product liability.

  • Page 48: General Conditions

    ■ Work habits General conditions In general, if you are comfortable, so is your computer, but read the following to make sure your work site provides a proper environment. ■ Make sure there is adequate space around the computer for proper ventilation.

  • Page 49: Seating And Posture

    Seating and posture The height of your chair in relation to the computer and keyboard as well as the support it gives your body are primary factors in reducing work strain. Below eye level Foot rest ■ Place your chair so that the keyboard is at or slightly below the level of your elbow.

  • Page 50: Connecting The Ac Adapter

    AC adapter to charge the battery pack, refer to Chapter 6, Power-Up Modes. Use of the wrong adapter could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC.

  • Page 51: Opening The Display

    1. Connect the power cord to the AC adapter. 2. Connect the DC output plug on the AC adapter to the DC IN input port on the back of the computer. 3. Plug the power cord into a live wall outlet. The Battery and DC IN indicators on the front of the computer should glow.

  • Page 52: Turning On The Power

    2. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel. Opening it vigorously or slamming it shut could damage the computer. Turning on the power This section describes how to turn on the power.

  • Page 53: Turning Off The Power

    For the computer to shut down in hibernation mode, the hibernation feature must be enabled in two places in Power Options: Hibernate tab and TOSHIBA Power Saver: Basic Setup tab. Otherwise, the computer will shut down in Standby mode. If battery power becomes depleted, data saved in Standby will be lost.

  • Page 54: Starting Hibernation

    2. Open Performance and Maintenance and open Power Options. 3. Select the Hibernation tab. 4. Select Enable Hibernate, then click OK button. 5. Open Toshiba Power Saver. 6. Select Setup Action tab. 7. Enable the desired Hibernation settings for When I press the power button and When I close the lid of my portable computer.

  • Page 55: Standby Mode

    If the computer is not used or accessed in any way, including areas such as the receipt of an e-mail, for approximately 15 or 30 minutes when the AC adapter is connected, it will automatically enter Standby Mode. This function is the default setting within the TOSHIBA Power Saver utility. ■...

  • Page 56: Restarting The Computer

    1. Click Start, then Shut Down and then Stand by. 2. Close the display panel. This feature must be enabled. Refer to the Setup Action tab in TOSHIBA Power Saver Utility described in the Control Panel. 3. Press the power button. This feature must be enabled. Refer to the Setup Action tab in TOSHIBA Power Saver Utility described in the Control Panel.

  • Page 57: Restoring The Pre-Installed Software From The Product Recovery Disc

    2. Switch on the computer and, when the In Touch with Tomorrow TOSHIBA prompt appears, press the F12 key to display the Boot Menu. 3. Use the up or down cursor key to select the CD-ROM/DVD drive in the display menu.

  • Page 58: Chapter 4 Operating Basics

    Operating Basics This chapter gives information on basic operations including using the TouchPad, optical disc drives, the internal modem, LAN and wireless LAN. It also provides tips on caring for your computer and on heat dispersal. Using the TouchPad To use the TouchPad, simply move your finger tip across it in the direction you want the on-screen pointer to go.

  • Page 59: Using The Internal Modem

    Do not press on the TouchPad too hard or press a sharp object such as a ball point pen against it. The TouchPad could be damaged. The TouchPad has similar functions to a two-button mouse with a scroll wheel. For some functions, you can tap it instead of pressing a button. You can customize pointing device actions in Mouse Properties.

  • Page 60: Region Selection

    1. Open the Modem Region Select application. It is located on the Programs menu at TOSHIBA Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available. If you change the Country/ Region in the Control Panel, the change may not take effect.

  • Page 61: Modem Selection

    Settings You can enable or disable the following settings: AutoRun Mode Region Select Utility starts automatically when you start up the operating system. Open the Dialling Properties dialogue box after selecting region. The dialling properties dialogue box will be displayed automatically after you select the region.

  • Page 62: Lan

    If you find that the modem speed is low or communication is interrupted when you are using the modem, please set the CPU speed to Maximum within the TOSHIBA Power Saver utility. Disconnecting To disconnect the modem cable, follow the steps below.

  • Page 63: Wireless Lan

    Connecting the LAN cable The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer's default settings could cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures. If you are using Ethernet LAN (10 megabits per second, 10BASE-T), you can connect using either a CAT5 or a CAT3 cable.

  • Page 64: Using Optical Disc Drives

    Internet is an open invitation for outsiders to abuse your ISP account and privileges. 2. TOSHIBA is not liable for the eavesdropping on your data due to the use of the wireless LAN connection and any damage that may occur thereof.
  • Page 65 If you have a CD-RW/DVD-ROM drive, refer also to the CD-RW/DVD-ROM drive If you have a DVD Super Multi drive supporting ±R Double Layer, refer also to the Writing CDs/DVDs on a DVD Super Multi drive supporting ±R Double Layer section for precautions on writing to CDs.
  • Page 66 3. Grasp the drawer gently and pull until it is fully open. 4. Lay the disc, label side up, in the drawer. Be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction. 5.
  • Page 67 Removing optical disc media To remove the disc, follow the steps below. Do not press the eject button while the computer is accessing the disc drive. Wait for the optical disc indicator to go out before you open the drawer. Also, if the disc is spinning when you open it, wait for it to stop before you remove it.
  • Page 68 Buttons The Internet button and the CD/DVD button can be assigned functions and applications in the TOSHIBA Controls Properties. CD/DVD play control buttons (optional) Icon * Windows Media Player 10 User’s Manual Windows mode AV Button DVD (WinDVD5) CD/DVD Detect and activate...

  • Page 69: Writing Cds On A Cd-Rw/Dvd-Rom Drive

    DVD-ROM drive may not function properly, and you may fail to write or rewrite, lose data or incur other damage. Disclaimer TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/RW disc that may be caused by writing or rewriting with this product.

  • Page 70: Before Writing Or Rewriting

    Media quality can affect write or rewrite success rates. CD-R: CD-RW: TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. ■ CD-RW can generally be rewritten about 1,000 times. However, the actual number of rewrites is affected by the quality of the media and the way it is used.

  • Page 71: Writing Cds/Dvds On A Dvd Super Multi Drive Supporting ±R Double Layer

    You can use the DVD Super Multi drive supporting ±R Double Layer to write data to either CD-R/RW or DVD-R/-RW/+R/+RW/-RAM discs. The following applications for writing are preinstalled: TOSHIBA Disc Creator/TOSHIBA Direct Disc Writer. InterVideo WinDVD Creator 2 Platinum, which is a product of InterVideo, Inc. Important message Before you write or rewrite to CD-R/RW or DVD-R/-RW/+R/+RW/-RAM media, read and follow all set-up and operating instructions in this section.
  • Page 72 Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM media. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
  • Page 73 ■ There are two types of DVD-R: authoring and general use discs. Do not use authoring discs. Only general use discs can be written to by a computer drive. ■ We can support only format 1 of DVD-R DL. Therefore you can not do the additional writing.

  • Page 74: Toshiba Disc Creator

    You cannot use the TOSHIBA Disc Creator "Audio CD" function to record music to the DVD-R/-RW or DVD+R/+RW media. ■ Do not use the "Disc Backup" function of TOSHIBA Disc Creator to copy DVD-Video and DVD-ROM with copyright protection. ■...

  • Page 75: Toshiba Direct Disc Writer

    TOSHIBA Disc Creator cannot record in packet format. ■ You might not be able to use the "Disc Backup" function of TOSHIBA Disc Creator to backup a DVD-R/-RW or DVD+R/+RW disc that was made with other software on a different DVD-R/-RW or DVD+R/+RW recorder.

  • Page 76: When Using Windvd Creator 2 Platinum

    When writing the Setup files for the program into a disc formatted by TOSHIBA Direct Disc Writer and starting Setup from this disc, an error may occur. In this case, plase copy them to your hard disc and then run Setup.

  • Page 77: Important Information For Use

    How to make a DVD-Video Simplified steps for making a DVD-Video from video data captured from a DV-Camcorder: 1. Click Start InterVideo WinDVD Creator to launch WinDVD Creator. 2. Click the Capture button then capture the video data from the DV-Camcorder via the IEEE1394a connection.
  • Page 78 ■ While recording video to DVD or tape, please close all other programs. ■ Do not run software like a screen saver because it can put a heavy load on the CPU. ■ Do not run communication applications like a modem or a LAN. 2.

  • Page 79: Media Care

    ■ If you use an over-used rewritable disc, the full formatting might be locked. Please use a brand new disc. Media Care This section provides tips on protecting data stored on your discs. Handle your media with care. The following simple precautions will increase the lifetime of your media and protect the data stored on it: 1.

  • Page 80: Tv-Out

    TV-Out Use the TV-Out port to connect to a television. Be sure to use a 4 pin type S-video cable. For more details, see Appendix B, Setting up more than one display You can set up your computer to utilize more than one display, effectively spreading a single desktop screen across two monitors.

  • Page 81: Cleaning The Computer

    Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and use care with liquids around the computer. ■ Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely before you turn it on again.

  • Page 82: Chapter 5 The Keyboard

    The Keyboard The computer's keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/ 102-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region's keyboard layout your computer is configured with.

  • Page 83: F1 ... F12 Function Keys

    Soft keys: Fn key combinations The Fn (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.

  • Page 84: Hotkeys

    Press Fn + Ctrl to simulate the enhanced keyboard's right Ctrl key. Hotkeys Fn + ESC Fn + F1 Fn + F2 Fn + F3 Fn + F4 Fn + F5 Default resolution for simultaneous mode is set to WXGA (1280 × 800). If you connect an RGB (Monitor) that is not WXGA resolution, change it in "Display Properties".

  • Page 85: Windows Special Keys

    Fn + 1 Fn + 2 Before using Fn + 1 and Fn + 2, you must install the TOSHIBA Zooming Utility. Please be aware that this 'zooming' function is only available within Microsoft Internet Explorer, Microsoft Office, Windows Media Player and Adobe Reader, and for the icons on the desktop.

  • Page 86: Numeric Mode

    Numeric mode To turn on the Numeric mode, press Fn + F11 (Numeric mode indicator lights). Now try numeric data entry using the keys below. Press Fn + F11 again to turn off the overlay. Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1.

  • Page 87: Generating Ascii Characters

    Temporarily changing modes If the computer is in Numeric mode, you can switch temporarily to Arrow mode by pressing a shift key. If the computer is in Arrow mode, you can switch temporarily to Numeric mode by pressing a shift key. Generating ASCII characters Not all ASCII characters can be generated using normal keyboard operation.

  • Page 88: Chapter 6 Power And Power-Up Modes

    Power and Power-Up Modes The computer's power resources include the AC adapter and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes. Power conditions The computer's operating capability and battery charge status are affected by the power conditions: whether an AC adapter is connected, whether a...

  • Page 89: Power Indicators

    • LED: Battery flashes amber DC IN off Computer goes into Hibernation or shuts down (depending on the TOSHIBA Power Saver setting) • No operation • LED: Battery off DC IN off The battery charge is low. The AC adapter must...

  • Page 90: Battery Types

    DC IN indicator Check the DC IN indicator to determine the power status with the AC adapter connected: Blue/Green No light Power indicator Check the Power indicator to determine the power status with the AC adapter connected: Blue/Green Blinking Amber No light Battery types The computer has two types of batteries:...

  • Page 91: Real Time Clock Battery

    Press <F1> to resume, <F2> to Setup. The computer's RTC battery is a lithium battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of.

  • Page 92: Care And Use Of The Battery Pack

    3. Set correct time and date. If you still see the error message after performing the above actions, please contact your TOSHIBA service representative. Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack.
  • Page 93 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the battery pack might rupture. 3. Make sure the battery is securely installed in the computer before attempting to charge the battery pack.

  • Page 94: Charging The Batteries

    5. Charge the battery pack only in an ambient temperature between 5 and 30 degrees Celsius. Otherwise, the electrolyte solution might leak, battery pack performance might deteriorate and the battery life might be shortened. 6. Be sure to monitor the remaining battery power. If the battery pack or real time clock battery discharge completely, Standby Mode will not function, and data in memory will be lost, and the computer might register an incorrect time and date.

  • Page 95: Battery Charging Notice

    Time The following table shows the time required to fully charge a discharged battery. Charging time (hours) Battery type Battery pack RTC battery The charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you use the computer.

  • Page 96: Monitoring Battery Capacity

    Leaving the AC adapter connected will shorten battery life. At least once a week, run the computer on battery power until the battery is fully discharged, then recharge the battery. Monitoring battery capacity Remaining battery power can be monitored by the TOSHIBA Power Saver. Refer to Utilities ■...

  • Page 97: Replacing The Battery Pack

    Retaining data with power off (standby mode) When you turn off your computer with fully charged batteries, the batteries retain data/charge for the following approximate time periods: Battery RTC battery * The availability of this battery is dependent on the model you purchased. Extending battery life To maximize the life of your battery pack: ■...

  • Page 98: Installing The Battery Pack

    The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. 1. Turn the computer's power off. 2. Disconnect all cables connected to the computer.

  • Page 99: Toshiba Password Utility

    TOSHIBA Password Utility The TOSHIBA Supervisor Password Utility provides two levels of password security: User and Supervisor. Passwords set in TOSHIBA Supervisor Password Utility are different from the Windows User Password To start the utility, point to or click the following items: Launch TOSHIBA Assist ■...

  • Page 100: Power-Up Modes

    Starting the computer by password If you registered a password, start the computer by entering the password manually. The password is necessary only if the computer was shut down in boot mode, not in Hibernation or Standby mode. To enter a password manually, follow these steps: 1.

  • Page 101: Chapter 7 Hw Setup

    HW Setup This chapter explains how to use the TOSHIBA HW Setup utility to configure your computer. TOSHIBA HW Setup lets you configure settings for various hardware devices through a number of tabs titled General, Password, Display, Boot Priority, Keyboard, CPU, LAN, and USB.
  • Page 102 General This window displays the BIOS version and contains two buttons: Default About Setup This field displays BIOS Version and date. Password This tab allows you to set or reset the user password for power on. Display This tab lets you customize your computer's display settings for either the internal LCD screen or for an external monitor.

  • Page 103: Boot Priority

    Boot Priority Boot Priority Options This option sets the priority for booting the computer. Select the boot priority from the drop down list. You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting: To select the boot drive you want, follow the steps below.
  • Page 104 Wake-up on LAN This feature lets the computer's power be turned on when it receives a wake-up signal from the LAN. Enabled Disabled The Wake-up on LAN function consumes power even when the system is off. Leave the AC adaptor connected while using this feature. Do not install or remove an optional memory module while Wake-up on LAN is enabled.

  • Page 105: Chapter 8 Optional Devices

    Optional Devices Optional devices can expand the computer's capabilities and its versatility. This chapter describes connection or installation of the following types of devices, which are available from your TOSHIBA dealer: Cards/Memory ■ PC card ■ SD-IO (Input / Output ) / SD (Secure Digital / miniSD) /...

  • Page 106: Pc Card

    The computer is equipped with a PC Card expansion slot that can accommodate one 5 mm Type II card. Any PC Card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slots support 16-bit PC Cards, including PC Card 16's multifunction card and CardBus PC Cards.
  • Page 107 Removing a PC card 1. Click the Safely Remove Hardware icon on the Task Bar. 2. Click the PC Card you want to remove. 3. Press the eject button of the PC Card to extend it. 4. Press the extended eject button to pop the card out slightly. 5.

  • Page 108: Sd-Io/Sd(Minisd With Adapter)/Mmc/Ms/Ms Pro/Xd Memory Cards (Optional)

    SD-IO/SD(miniSD with Adapter)/MMC/MS/MS Pro/ xD Memory cards (optional) The computer is equipped with a multiple digital media card slot that can accommodate SD-IO/SD(miniSD with Adapter)/MMC/MS/MS Pro/xD memory cards. These memory cards let you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, which use flash-memory.

  • Page 109: Installing A Memory Card

    Installing a memory card To install a memory card: 1. Insert the memory card. 2. Press gently to ensure a firm connection. Be sure the memory card is oriented properly before you insert it. If Windows ® The multiple digital media card slot only accepts one type of card at a time. Do not attempt to install more than one card as you risk damaging either the cards themselves or the computer.

  • Page 110: Memory Card Care

    4. Grasp the card and remove it. ■ Make sure the memory card indicator is out before you remove the card or turn off the computer's power. If you remove the card or turn off the power while the computer is accessing the card you may lose data or damage the card.

  • Page 111: Memory Expansion

    CAUTION: If you want to upgrade system memory, you should only use certified modules. Ask your vendor or check the TOSHIBA web site for a list of approved memory products.
  • Page 112 5. Slide your fingernail or a thin object under the cover and lift it off. 6. Fit the module's connectors into the computer's connectors at about a 45 degree angle and press the module carefully to ensure a firm connection. Do not touch the connectors on the memory module or on the computer.

  • Page 113: Removing A Memory Module

    Removing a memory module If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them. To remove the memory module, make sure the computer is in boot mode then: 1.

  • Page 114: Additional Battery Pack

    Additional battery pack You can increase the portability of the computer with additional battery packs. If you're away from an AC power source and your battery runs low, you can replace it with a freshly charged battery. See Chapter 6, Power-Up Modes.
  • Page 115 For the ATI Graphics Controller 1. Click Start 2. Click the Settings tab. 3. Click the Advanced button and choose Displays. User’s Manual Control Panel Display. Optional Devices 8-11...
  • Page 116 4. Click the TV button to open the TV Properties dialog box. 5. Adjust the TV properties accordingly. 6. Adjusting the TV settings. For the Intel Graphics Controller 1. Click Start 2. Choose Display to open the Display Properties dialog box. 3.
  • Page 117 Optional Devices 4. Click the Advanced button and choose Intel ® Graphics Media Accelerator Driver. 5. Click the Graphic Properties button and choose TV. User’s Manual 8-13...

  • Page 118: I.link (Ieee1394A)

    6. Adjusting the TV settings. i.LINK (IEEE1394a) i.LINK (IEEE1394a) is used for high-speed data transfer for a range of compatible devices such as: ■ Digital video cameras ■ Hard disk drives ■ MO drives ■ Optical disc drives i.LINK uses a four-pin connector, which does not carry electric current. External devices will need their own power supply.

  • Page 119: Security Lock

    Connecting 1. Make sure the connectors are properly aligned and plug the i.LINK (IEEE1394a) cable into the computer. 2. Plug the other end of the cable into the device. Note the following when you use i.LINK: ■ You may need to install drivers for your i.LINK devices. ■...

  • Page 120: Troubleshooting

    Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.

  • Page 121: Preliminary Checklist

    Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer.

  • Page 122: Hardware And System Checklist

    Software Hardware Hardware and system checklist This section discusses problems caused by your computer’s hardware or attached peripherals. Basic problems may occur in the following areas: ■ System start-up ■ Self test ■ Power ■ Overheating power down ■ AC Power ■...

  • Page 123: Self Test

    If any of the following conditions are present, the self test failed: ■ The computer stops and does not proceed to display information or messages except the TOSHIBA logo. ■ Random characters appear on the screen, and the system does not function normally.
  • Page 124 AC power If you have trouble turning on the computer with the AC adapter connected, check the DC IN indicator. Refer to Chapter 6, Modes, for more information. Problem AC adapter doesn't power the computer (DC IN indicator does not glow green or blue (depending the model you purchased)).
  • Page 125 Replace it. If you do not think the battery is at the end of its operating life, see your dealer. Check the power consumption settings in the TOSHIBA Power Saver Utility. Consider using a power saving mode. Procedure Power and Power-Up Keyboard.

  • Page 126: Lcd Panel

    Problem Output to screen is garbled. LCD panel Problem Lines appear broken. No display Problems above remain unresolved or other problems occur. Hard disk drive Problem Computer does not boot from hard drive. Slow performance User’s Manual Procedure Make sure the software you are using is not remapping the keyboard.
  • Page 127 Memory Card Refer also to Chapter 8, Problem Memory card error occurs Wireless LAN If the following procedures do not restore LAN access, consult your LAN administrator. For more information on wireless communication, refer to Chapter 4, Operating Problem Cannot access Wireless PC Card Refer also to Chapter 8, Problem...

  • Page 128: Sound System

    Problem No display Display error occurs Monitor goes into panning mode Sound system Problem No sound is heard Pointing device If you are using a USB mouse, also refer to the and to your mouse documentation. USB mouse Problem On-screen pointer does not respond to mouse movement User’s Manual...

  • Page 129: Tv Output Signal

    Problem Double-clicking does not work The mouse pointer moves too fast or too slow The mouse pointer moves erratically Refer also to your USB device’s documentation. Problem USB device does not work TV output signal Problem Display on TV is poor No display If you turn the computer off in Standby Mode while the display is on a TV, the computer will select either the internal LCD or an external computer...
  • Page 130 Problem Cannot access LAN or the Wake up on LAN feature does not work Standby/Hibernation Problem The system will not enter Standby/ Hibernation Memory expansion Refer also to Chapter 8, memory modules. Problem The computer hangs up and issues beep sounds.
  • Page 131 Modem Problem Communication software can't initialize the modem You can hear a dial tone but can't make a call You place a call, but a connection can't be made After making a call you can't hear a ring Communication is cut off unexpectedly CONNECT quickly replaced by...
  • Page 132 DVD Super Multi drive supporting ±R Double Layer For more information, refer to Chapter 4, Problem You cannot access a disc in the drive Some discs run correctly, but others do User’s Manual Operating Procedure Make sure the drive's drawer is securely closed. Press gently until it clicks into place.
  • Page 133 User’s Manual Procedure If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.

  • Page 134: Disk Drive

    The Grand Tour. If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.

  • Page 135: Toshiba Support

    Time. TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first.

  • Page 136: Disclaimers

    Disclaimers This chapter states the Disclaimer(s) information applicable to TOSHIBA computers. Central Processing Unit ("CPU") Performance Disclaimer. CPU performance in your computer product may vary from specifications under the following conditions: ■ use of certain external peripheral products ■ use of battery power instead of AC power ■...

  • Page 137: Memory (Main System)

    Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.

  • Page 138: Wireless Lan

    Maximum brightness is only available when operating in AC power mode. The screen will dim when the computer is operated on battery power and you will not be able to increase the brightness of the screen. Wireless LAN The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations.

  • Page 139: Specifications

    Specifications This appendix summarizes the computer's technical specifications. Dimensions 360mm (W) × 263mm (D) × 38.5mm (H. Max.) User’s Manual Appendix A 263mm 38.5mm...

  • Page 140: Environmental Requirements

    Weight Starting at 2.72kg / 5.99lbs* * Weight may vary depending on product configuration, vendor components, manufacturing variability and options selected. Environmental Requirements Conditions Operating Non-operating Conditions Operating Non-operating Built-in Modem Network control unit (NCU) Type of NCU Type of line Type of dialling Control command Monitor function...
  • Page 141 Communication Speed Error correcting Data compression User’s Manual Data transmission and reception 300/1200/2400/4800/7200/9600/12000/14400/ 16800/19200/21600/24000/26400/28800/31200/ 33600 bps Data reception only with V.90/V.92 28000/29333/30666/32000/33333/34666/36000/ 37333/38666/40000/41333/42666/44000/45333/ 46666/48000/49333/50666/52000/53333/54666/ 56000 bps Fax: 2400/4800/7200/9600/12000/14400 bps MNP class 4 and ITU-T V.42 MNP class 5 and ITU-T V.42bis Specifications...

  • Page 142: Display Modes

    Display Modes This appendix contains a table listing all the display modes when the display is set to an external monitor. CRT Display Resolution 800 × 600 1024 × 768 1280 × 800 1280 × 1024 1600 × 1200 1920 × 1440 2048 ×...

  • Page 143: Displaying Movies On A Tv Or Crt

    Displaying movies on a TV or CRT This section describes how to set up your system to display movies simultaneously on your computer's LCD and on an external TV or CRT monitor. Follow the steps below. For the ATI Graphics Controller 1.
  • Page 144 Display Modes 5. In the properties box, if any additional options are available for your particular device, set them to your liking. 6. Finally, click the ATI Overlay tab to adjust the video overlay properties. 7. Click Setting tab. 8. Click the Graphic Properties button and choose TV. User’s Manual...
  • Page 145 For the Intel Graphics Controller 1. Click Start 2. Choose Display to open the Display Properties dialog box. 3. Click Setting tab. 4. Click the Advanced button and choose Intel Accelerator Driver. User’s Manual Control Panel Appearance and Themes. Display Modes ®...
  • Page 146 Display Modes 5. Click the Graphic Properties button and choose TV. 6. Adjusting the TV settings. User’s Manual...

  • Page 147: Ac Power Cord And Connectors

    AC Power Cord and Connectors The power cord's AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Wire size:...
  • Page 148 In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV-F. For the United States and Canada, two pin plug configuration must be a 2-15P (250V) or 1-15P (125V) and three pin plug coniguration must be 6-15P (250V) or 5-15P (125V) as designated in the U.

  • Page 149: If Your Computer Is Stolen

    What is your address, phone, and fax number? To register the theft on paper, please follow these procedures: ■ Fill in the TOSHIBA Theft Registration form (or a copy of it) below. ■ Attach a copy of your receipt showing where your computer was purchased.

  • Page 150: Toshiba Theft Registration

    In the Computer Systems page, open the Support & Downloads menu and choose the Stolen Units Database option. Your entries are used to track your computer at our service points. TOSHIBA Theft Registration Send to: Fax number: +49 (0) 941 7807 921...
  • Page 151 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port ASCII: American Standard Code for Information Interchange BIOS: basic input output system CD-ROM: Compact Disc-Read Only Memory CD-RW: Compact Disc-Read/Write CMOS: complementary metal-oxide semiconductor CPU: central processing unit...
  • Page 152 MS-DOS: Microsoft Disk Operating System PCI: peripheral component interconnect RAM: random access memory ROM: read only memory RTC: real time clock SCSI: small computer system interface TFT: thin-film transistor USB: Universal Serial Bus VESA: Video Electronic Standards Association VGA: video graphics array WXGA: wide extended graphics array adaptor: A device that provides an interface between two dissimilar electronic devices.
  • Page 153 cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time.
  • Page 154 CRT: Cathode Ray Tube. A vacuum tube in which beams projected on a fluorescent screen-producing luminous spots. An example is the television set. cursor: A small, blinking rectangle or line that indicates the current position on the display screen. DC: Direct Current. Electric current that flows in one direction. This type of power is usually supplied by batteries.
  • Page 155 format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk. function keys: The keys labeled F1 through F12 that tell the computer to perform certain functions.
  • Page 156 jumper: A small clip or wire that allows you to change the hardware characteristics by electrically connecting two points of a circuit. K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power. See also byte and kilobyte. KB: See kilobyte.
  • Page 157 operating system: A group of programs that controls the basic operation of a computer. Operating system functions include interpreting programs, creating data files, and controlling the transmission and receipt (input/output) of data to and from memory and peripheral devices. output: The results of a computer operation. Output commonly indicates data.
  • Page 158 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. TouchPad: A pointing device integrated into the TOSHIBA computer palm rest. Universal Serial Bus: This serial interface lets you communicate with several devices connected in a chain to a single port on the computer.

This manual is also suitable for:

Satellite a110-110Satellite a110-133Satellite a110-180Satellite a110-160Satellite a110-cf1Satellite a110-st1111 ... Show all

Table of Contents