4.12 Top Cover
3. Turn the computer upside down and remove eleven M2.5x12, three M2.5x8, and one
silver M2.5x3 screws securing the bottom cover to the top cover.
Figure 4-28
4. Turn the computer upright to lift off the top cover.
Installing the Top Cover
To install the top cover, follow the steps below and refer to the figures in the preceding
section.
1.
Seat the top cover and secure the upper FFC cable and Touchpad FFC cable to the
computer's top chassis.
2.
Secure the top cover with one silver M2.5x13 screw, two M2.5x6 screws, and one
M2.5x3 screw.
3.
Turn the computer upside down and secure eleven M2.5x12, three M2.5x8, and one
silver M2.5x3 screws.
Detroit 20 /Detroit 20E Series Maintenance Manual
Removing the top cover (back panel screws)
4 Replacement Procedures
[CONFIDENTIAL]
4-27