4 Replacement Procedures
4.12 Top Cover
4.12 Top Cover
Removing the Cover
To remove the top cover, first remove the battery pack, keyboard, display assembly, optical
drive, HDD, memory module, and wireless LAN as described in the preceding sections, then
follow the steps below:
1. Remove one silver M2.5x13 screw, two M2.5x6 screws, and one M2.5x3 screw securing
top cover.
Figure 4-26
Removing the top cover (front panel screws)
2. Detach the Power Switch FFC cable and TouchPad FFC cable on the top chassis.
Figure 4-27
Removing the cables
[CONFIDENTIAL]
4-26
Detroit 20 /Detroit 20E Series Maintenance Manual